Publications

• Sommaire
  • 2012
  • 2011
  • 2010
  • 2009

2012

N. Bahlouli, D. Pessey, C. Raveyre, J. Guillet, S. Ahzi, J.M. Hiver, A. Dahoun, Recycling effects on the rheological and thermomechanical properties of polypropylene-based composites, Materials and Design 33 (1) , pp. 451-458 , 2012.

Baniassadi, M., Ahzi, S., Garmestani, H., Ruch, D., Remond, Y. : New approximate solution for N-point correlation functions for heterogeneous materials, (2012) Journal of the Mechanics and Physics of Solids, 60 (1), pp. 104-119.

Baniassadi, M., Ghazavizadeh, A., Rémond, Y., Ahzi, S., Ruch, D., Garmestani, H. : Qualitative equivalence between electrical percolation threshold and effective thermal conductivity in polymer/carbon nanocomposites, (2012) Journal of Engineering Materials and Technology, Transactions of the ASME, 134 (1), art. no. 010902.

Baniassadi, M., Mortazavi, B., Hamedani, H.A., Garmestani, H., Ahzi, S., Fathi-Torbaghan, M., Ruch, D., Khaleel, M. : Three-dimensional reconstruction and homogenization of heterogeneous materials using statistical correlation functions and FEM, (2012) Computational Materials Science, 51 (1), pp. 372-379.

N. Barth, D. George, S. Ahzi, Y. Rémond, V. Doquet, F. Bouyer and S. Betrémieux, Modeling and simulation of the cooling process of borosilicate glass, Journal of Engineering Materials and Technology, 2012, vol. 134 (4), pp. 041001.

N. Bourdet, C. Deck, R. P. Carreira, and R. Willinger, “Head Impact Conditions in the Case of Cyclist Falls,” Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, Apr. 2012.

N. Bourdet, C. Deck, V. Tinard and R. Willinger, Behaviour of helmets during head impact in real accident cases of motorcyclists, International Journal of Crashworthiness, Volume 17, Issue 1, 2012, pages 51-61

Davami, K., Mortazavi, B., Ghassemi, H.M., Yassar, R.S., Lee, J.-S., Rémond, Y., Meyyappan, M. : A computational and experimental investigation of the mechanical properties of single ZnTe nanowires, (2012) Nanoscale, 4 (3), pp. 897-903.

Delgado-Rangel, J.-A., Addiego, F., Eddoumy, F., Ahzi, S., Patlazhan, S., Toniazzo, V., Ruch, D. : Impact of microextrusion and addition of graphite nanoplatelets on bulk and surface mechanical properties of UHMWPE, (2012) Journal of Applied Polymer Science, 125 (6), pp. 4316-4325.

Delgado, A., Addiego, F., Ahzi, S., Patlazhan, S., Toniazzo, V., Ruch, D. : Microstructure design of UHMWPE-based materials: Blending with graphite nanoplatelets, (2012) IOP Conference Series: Materials Science and Engineering, 31, art. no. 012009.

Ghazavizadeh, A., Soltani, N., Baniassadi, M., Addiego, F., Ahzi, S., Garmestani, H. : Composition of two-point correlation functions of subcomposites in heterogeneous materials, (2012) Mechanics of Materials, 51, pp. 88-96.

Li, D., Ahzi, S., Khaleel, M. : Bridging microstructure, properties, and processing of polymer based advanced materials, (2012) Journal of Engineering Materials and Technology, Transactions of the ASME, 134 (1), art. no. 010301, .

A. Madeo, D. George, T. Lekszycki, M. Nierenberger, Y. Rémond, A second gradient continuum model accounting for some effects of microstructure on reconstructed bone remodeling, Compte Rendus Académie des Sciences, Mécanique, 2012, vol. 340 (8), pp. 575-589.

R. Matadi Boumbimba, K. Wang, N. Bahlouli, S. Ahzi, Y. Rémond, F. Addiego, Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposites. Mechanics of Materials, 52, pp. 58-68. 2012.

Mortazavi, B., Rémond, Y. : Investigation of tensile response and thermal conductivity of boron-nitride nanosheets using molecular dynamics simulations, (2012) Physica E: Low-Dimensional Systems and Nanostructures, 44 (9), pp. 1846-1852.

Mortazavi, B., Ahzi, S., Toniazzo, V., Rémond, Y. : Nitrogen doping and vacancy effects on the mechanical properties of graphene: A molecular dynamics study, (2012) Physics Letters, Section A: General, Atomic and Solid State Physics, 376 (12-13), pp. 1146-1153.

Mortazavi, B., Rémond, Y., Ahzi, S., Toniazzo, V. : Thickness and chirality effects on tensile behavior of few-layer graphene by molecular dynamics simulations, (2012) Computational Materials Science, 53 (1), pp. 298-302.

Mortazavi, B., Rajabpour, A., Ahzi, S., Rmond, Y., Mehdi Vaez Allaei, S. : Nitrogen doping and curvature effects on thermal conductivity of graphene: A non-equilibrium molecular dynamics study, (2012) Solid State Communications, 152 (4), pp. 261-264.

Mortazavi, B., Bardon, J., Ahzi, S., Ghazavizadeh, A., Rémond, Y., Ruch, D. : Atomistic-continuum modeling of the mechanical properties of silica/epoxy nanocomposite, (2012) Journal of Engineering Materials and Technology, Transactions of the ASME, 134 (1), art. no. 010904.

Mortazavi, B., Ahzi, S. : Molecular dynamics study on the thermal conductivity and mechanical properties of boron doped graphene, (2012) Solid State Communications, 152 (15), pp. 1503-1507.

Mortazavi, B., Bardon, J., Bomfim, J.A.S., Ahzi, S. : A statistical approach for the evaluation of mechanical properties of silica/epoxy nanocomposite: Verification by experiments, (2012) Computational Materials Science, 59, pp. 108-113.

Mossi Idrissa, A.K., Ahzi, S., Patlazhan, S., Rémond, Y., Ruch, D. : A constitutive model for stress-strain response and Mullins effect in filled elastomers, (2012) Journal of Applied Polymer Science, 125 (6), pp. 4368-4375.

Z. Nibennanoune, D. George, F. Antoni, S. Ahzi, D. Ruch, J. Gracio and Y. Remond, Improving diamond coating on Ti6Al4V substrate using a diamond like carbon interlayer : Raman residual stress evaluation and AFM analyses, Diamond and Related Materials, 2012, vol. 22, pp. 105-112.

Patlazhan, S., Remond, Y. : Structural mechanics of semicrystalline polymers prior to the yield point: A review, (2012) Journal of Materials Science, 47 (19), pp. 6749-6767.

Peng Y., HanY,Yang J,Chen Y.,Willinger R Assessment of the protective performance of hood using head FE model in car-pedestrian collisions. . Int J Crash Worthiness: accepted in Jan 2012

R. A. Rahman, D. George, D. Baumgartner, M. Nierenberger, Y. Rémond, S. Ahzi, An asymptotic method for the prediction of the anisotropic effective elastic properties of the cortical vein – superior sagital sinus junction embedded within a homogenized cell element, Journal of Mechanics of Materials and Structures, 2012, vol. 7 (6), pp. 593-611.

Rohatgi, A., Stephens, E.V., Davies, R.W., Smith, M.T., Soulami, A., Ahzi, S. : Electro-hydraulic forming of sheet metals: Free-forming vs. conical-die forming, (2012) Journal of Materials Processing Technology, 212 (5), pp. 1070-1079.

Wang, K., Matadi,-R., Bahlouli, N., Ahzi S., Muller, R., Bouquey, M. Dynamic compressive behavior of a melt mixed polypropylene/organoclay nanocomposites Journal of Engineering Materials and Technology, Volume: 134   Issue: 1, 2012.

Wang, K., Addiego, F., Bahlouli, N., Ahzi, S., Rémond, Y., Toniazzo, V. and Muller, R., Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends. Polymer Degradation and Stability, 97(8), pp. 1475-1484,2012.

Wang, K., Boumbimba, R.M., Bahlouli, N., Ahzi, S., Muller, R., Bouquey, M. : Dynamic compressive behavior of a melt mixed polypropylene/organoclay nanocomposites, (2012) Journal of Engineering Materials and Technology, Transactions of the ASME, 134 (1), art. no. 010905.

Wen, W., M'Guil, S., Ahzi, S. : Rolling texture transition in FCC metals using the viscoplastic φ -model and considering mechanical twinning, (2012) Materials Science Forum, 702-703, pp. 241-244.

Zhu, W., Nicolau, S., Soler, L., Hostettler, A., Marescaux, J., Rémond, Y. : Fast segmentation of abdominal wall: Application to sliding effect removal for non-rigid registration, (2012) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7601 LNCS, pp. 198-207.

2011

Ahzi, S. : Multiphysics approaches for the behavior of polymer-based materials, (2011) Journal of Engineering Materials and Technology, Transactions of the ASME, 133 (3), art. no. 030301.

Addiego, F., Buchheit, O., Ruch, D., Ahzi, S., Dahoun, A. : Does texturing of UHMWPE increase strength and toughness? A pilot study, (2011) Clinical Orthopaedics and Related Research, 469 (8), pp. 2318-2326.

Baniassadi, M., Ghazavizadeh, A., Ruch, D., Rémond, Y., Ahzi, S., Garmestani, H. : Application of the strong contrast technique to thermoelastic characterization of nanocomposites, (2011) TMS Annual Meeting, 2, pp. 905-910.

Baniassadi, M., Safdari, M., Ghazavizadeh, A., Garmestani, H., Ahzi, S., Grácio, J., Ruch, D. : Incorporation of electron tunnelling phenomenon into 3D Monte Carlo simulation of electrical percolation in graphite nanoplatelet composites, (2011) Journal of Physics D: Applied Physics, 44 (45), art. no. 455306.

Baniassadi, M., Laachachi, A., Hassouna, F., Addiego, F., Muller, R., Garmestani, H., Ahzi, S., Toniazzo, V., Ruch, D. : Mechanical and thermal behavior of nanoclay based polymer nanocomposites using statistical homogenization approach, (2011) Composites Science and Technology, 71 (16), pp. 1930-1935.

Baniassadi, M., Laachachi, A., Makradi, A., Belouettar, S., Ruch, D., Muller, R., Garmestani, H., Toniazzo, V., Ahzi, S. : Statistical continuum theory for the effective conductivity of carbon nanotubes filled polymer composites, (2011) Thermochimica Acta, 520 (1-2), pp. 33-37.

Baniassadi, M., Addiego, F., Laachachi, A., Ahzi, S., Garmestani, H., Hassouna, F., Makradi, A., Toniazzo, V., Ruch, D. : Using SAXS approach to estimate thermal conductivity of polystyrene/zirconia nanocomposite by exploiting strong contrast technique, (2011) Acta Materialia, 59 (7), pp. 2742-2748.

Baniassadi, M., Garmestani, H., Li, D.S., Ahzi, S., Khaleel, M., Sun, X. : Three-phase solid oxide fuel cell anode microstructure realization using two-point correlation functions, (2011) Acta Materialia, 59 (1), pp. 30-43.

Baumgartner D, Lamy M, Willinger R, Davidsson J., A finite element model of the rat brain for injury investigation, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 14, N° S1, pp. 273-274, 2011.

Boumbimba, R.M., Ahzi, S., Bahlouli, N., Ruch, D., Gracio, J. : Dynamic mechanical properties of PMMA/oganoclay nanocomposite: Experiments and modeling, (2011) Journal of Engineering Materials and Technology, Transactions of the ASME, 133 (3), art. no. 030908, .

Bourdet N, Willinger R. : Whiplash injury criteria investigation with a global head neck torso model.: Int. J. of Vehicle safety, 2011, vol 5, N°2, 168-188.

N. Bourdet, C. Deck, V. Tinard, and R. Willinger, “Behaviour of helmets during head impact in real accident cases of motorcyclists,” International Journal of Crashworthiness, vol. 17, no. 1, pp. 51–61, 2011.

Chatelin S., Oudry J., Périchon N, Sandrin L., Allemann P., Soler L., Willinger R. : In vivo liver tissue mechanical properties by transient elastography : Comparison with dynamic mechanical analysis. Biorheology 48 (2011) 75-88.

Chatelin S., Deck C., Renard F., Kremer S., Heinrich C., Armspach JP, Willinger R : Computation of axonal elongation in head trauma finite element simulation. J of Mech. Behavior of Biomed Material, Vol.4, 2011, 1905-1919

Ghajari M., Galvaneto U ,Iannucci L, Willinger R :Influence of body on the response of the helmeted head during impact. Int. J. Crashwortheness, 2011, V16, N°3, 285-295.

Ghazavizadeh, A., Baniassadi, M., Safdari, M., Atai, A.A., Ahzi, S., Patlazhan, S.A., Gracio, J., Ruch, D. : Evaluating the effect of mechanical loading on the electrical percolation threshold of carbon nanotube reinforced polymers: A 3D Monte-Carlo study, (2011) Journal of Computational and Theoretical Nanoscience, 8 (10), pp. 2087-2099.

Hamedani, H.A., Baniassadi, M., Khaleel, M., Sun, X., Ahzi, S., D.ruch, Garmestani, H. : Microstructure, property and processing relation in gradient porous cathode of solid oxide fuel cells using statistical continuum mechanics, (2011) Journal of Power Sources, 196 (15), pp. 6325-6331.

Hizoum, K., Rémond, Y., Patlazhan, S. : Coupling of nanocavitation with cyclic deformation behavior of high-density polyethylene below the yield point, (2011) Journal of Engineering Materials and Technology, Transactions of the ASME, 133 (3), art. no. 030901.

Idrissa, A.K.M., Ahzi, S., Rémond, Y., Gracio, J. : Modeling of the stress-birefringence-stretch behavior in rubbers using the Gent model, (2011) Journal of Engineering Materials and Technology, Transactions of the ASME, 133 (3), art. no. 030905.

Lamy M, Baumgartner D, Willinger R, Yoganandan N, Stemper B.D.: Study of mild traumatic brain injuries using experiments and finite element modeling, Annals of Advances in Automotive Medicine, Vol. 55, pp. 125-135, 2011

A. Laurent-Vannier, M. Nathanson, F. Quiriau, E. Briand-Huchet, J. Cook, T. Billette de Villemeur, J. Chazal, C. Christophe, S. Defoort-Dhellemmes, G. Fortin, C. Rambaud, J.S. Raul, C. Rey-Salmon, F. Sottet, E. Vieux, M. Vinchon, R. Willinger : A public hearing ‘‘Shaken baby syndrome: Guidelines on establishing a robust diagnosis and the procedures to be adopted by healthcare and social services staff’’. Guidelines issued by the Hearing Commission. Anals of physical and rehabilitation medicine, 2011, v333, 26p.

Matadi,-R., Ahzi,-S., Bahlouli,-A., Ruch,-D., Gracio J : Dynamic mechanical properties of PMMA/oganoclay nanocomposite: Experiments and modeling Journal of engineering material and technology. Volume: 133   Issue: 3, 2011.

Matadi, R., Hablot, E., Wang, K., Bahlouli, N., Ahzi, S., Avérous, L. : High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibres, (2011) Composites Science and Technology, 71 (5), pp. 674-682.

M'Guil, S., Ahzi, S., Barlat, F., Gracio, J.J. : Microstructural effects on yield surface evolution in cubic metals using the viscoplastic φ-model, (2011) International Journal of Plasticity, 27 (1), pp. 102-120.

M'Guil, S., Wen, W., Ahzi, S., Gracio, J.J. : Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic φ-model-based grain-interaction, (2011) Materials Science and Engineering A, 528 (18), pp. 5840-5853.

Mortazavi, B., Ahzi, S., Bardon, J., Laachachi, A., Ruch, D. : Investigation of mechanical properties of silica/epoxy nano-composites by molecular dynamics and finite element modeling, (2011) TMS Annual Meeting, 2, pp. 117-120.

Oussouaddi, O., Daridon, L., Ahzi, S., Chrysochoos, A. : Influence of dissipated energy on shear band spacing in HY-100 steel, (2011) Journal of Engineering Materials and Technology, Transactions of the ASME, 133 (2), art. no. 021002, .

Yong Peng, Yong Chen, Jikuang Yang, Dietmar Otte, and Remy Willinger :A study of pedestrian and bicyclist exposure to head injury in passenger car collisions based on accident data and simulations. J of Safety Science , accepted in Dec 2011.

Rogueda-Berriet, C., Bahlouli, N., Pessey, D., Rémond, Y. : Mechanical behavior of recycled polypropylene composites under tensile, bending, and creep loading: Experimental and modeling, (2011) Journal of Engineering Materials and Technology, Transactions of the ASME, 133 (3), art. no. 030907.

Tinard V, Deck C., Bourdet N., Willinger : Motorcyclist helmet composite outer shell characterisation and modelling. J of Materials and Design 32 (2011), pp. 3112-3119.

Umale S , Chatelin S, Bourdet N, Deck C ,Diana M, Dhumane P, Soler L, Marescaux J, Willinger R:Experimental in vitro characterization of Porcine Glisson’s Capsule and Hepatic Veins. J. of Biomechanics, 2011, V44, N°9, 1678-1683.

2010

N. Bahlouli, C. Rogueda-Berriet, J. Guillet, C. Raveyre : Propriétés rhéologiques et mécaniques des composites à matrice polypropylène pour l’automobile: effets couples de la pollution et du recyclage, Revue des Composites et des Matériaux Avancés, Volume20 n° 3/2010.

Baniassadi, M., Ghazavizadeh, A., Safdari, M., Garmestani, H., Ahzi, S. : Effect of mechanical deformation on electrical percolation of CNT polymer composites, (2010) ASME International Mechanical Engineering Congress and Exposition, Proceedings, 12 (PART B), pp. 893-897.

Bouhala, L., Belouettar, S., Makradi, A., Remond, Y. : Study of interface influence on crack growth: Application to Solid Oxide Fuel Cell like materials design, (2010) Materials and Design, 31 (3), pp. 1033-1041.

Chatelin S., Constantinesco A., Willinger R. : Fifty years of brain tissue mechanical testing. J of Biorheology 2010, vol. 47, 255-276.

Chivrac, F., Gueguen, O., Pollet, E., Averous, L., Ahzi, S., Belouettar, S. : Micromechanically-based formulation of the cooperative model for the yield behavior of starch-based nano-biocomposites, (2010) Journal of Nanoscience and Nanotechnology, 10 (4), pp. 2949-2955.

M. Dubé, V. Doquet, A. Constantinescu, D. George, Y. Rémond and S. Ahzi, Modeling of Thermal Shock-Induced Damage in a Borosilicate Glass, Mechanics of materials, 2010, vol. 42, issue 9, pp 863-872

Gueguen, O., Ahzi, S., Makradi, A., Belouettar, S. : A new three-phase model to estimate the effective elastic properties of semi-crystalline polymers: Application to PET, (2010) Mechanics of Materials, 42 (1), pp. 1-10.

Hablot, E., Wang, K., Bahlouli, N., Ahzi, S., Averous, L, High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibers” Composites Science and Technology 71 (5), pp. 674-682

Hablot, E., Matadi, R., Ahzi, S., Avérous, L. : Renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres: Thermal, physical and mechanical properties, (2010) Composites Science and Technology, 70 (3), pp. 504-509.

Hablot, E., Matadi, R., Ahzi, S., Vaudemond, R., Ruch, D., Avérous, L. : Yield behaviour of renewable biocomposites of dimer fatty acid-based polyamides with cellulose fibres, (2010) Composites Science and Technology, 70 (3), pp. 525-529.

A. Hostettler, D. George, Y. Rémond, S. A. Nicolau, L. Soler and J. Marescaux, Bulk Modulus and Volume Variation Measurement of the Liver and Kidneys in vivo using Abdominal Kinetics during free Breathing, Computer Method and Programs in Biomedicine, 2010, vol. 100, pp. 149-157.

Hostettler, A., Nicolau, S.A., Rémond, Y., Marescaux, J., Soler, L. : A real-time predictive simulation of abdominal viscera positions during quiet free breathing, (2010) Progress in Biophysics and Molecular Biology, 103 (2-3), pp. 169-184.

Li, D.S., Baniassadi, M., Garmestani, H., Ahzi, S., Reda Taha, M.M., Ruch, D. : 3D reconstruction of Carbon nanotube composite microstructure using correlation functions, (2010) Journal of Computational and Theoretical Nanoscience, 7 (8), pp. 1462-1468.

Matadi, R., Gueguen, O., Ahzi, S., Gracio, J., Muller, R., Ruch, D. : Investigation of the stiffness and yield behaviour of melt-intercalated poly(methyl methacrylate)/organoclay nanocomposites: Characterisation and modelling, (2010) Journal of Nanoscience and Nanotechnology, 10 (4), pp. 2956-2961.

Marchesseau S., Heiman T., Chatelin S, Willinger R, Delingette H : Fast porous visco-hyperelastic soft tissue model for surgery simulation : Application to liver surgery. Progress in Biophysics & Molecular Biology 2010, (103), 185-196.

M'Guil, S., Wen, W., Ahzi, S. : Numerical study of deformation textures, yield locus, rolling components and Lankford coefficients for FCC polycrystals using the new polycrystalline φ-model, (2010) International Journal of Mechanical Sciences, 52 (10), pp. 1313-1318.

Mikdam, A., Makradi, A., Ahzi, S., Garmestani, H., Li, D.S., Remond, Y. : Statistical continuum theory for the effective conductivity of fiber filled polymer composites: Effect of orientation distribution and aspect ratio, (2010) Composites Science and Technology, 70 (3), pp. 510-517.

Z. Nibennaoune, D. George, F. Antoni, J. Santos, G. Cabral, S. Ahzi, D. Ruch, J. Gracio and Y. Rémond, Towards Optimization of Time Modulated Chemical Vapour Deposition for Nanostructured Diamond Films on Ti6Al4V, Journal of Nanoscience and Nanotechnology, 2010, vol. 10, pp 2838-2843.

Z. Nibennaoune, D. George, S. Ahzi, D. Ruch, Y. Rémond and J. Gracio, Numerical Simulation of Residual Stresses in Diamond Coating on Ti-6Al-4V Substrate, Thin Solid Films, 2010, vol. 518, pp 3260-3266.

D. Pessey, N. Bahlouli, C. Raveyre, J. Guillet, S. Ahzi, JM Hiver, A. Dahoun : Characterization of pollution effects for two PPbased materials, (2010) Polymer Engineering and Science, 50 (1), pp. 1-9.

Pinnoji PK, , P. Mahajan, N. Bourdet, C. Deck, R. Willinger : Impact Dynamics of Metal Foam Shells for Motorcycle Helmets: Experiments & Numerical Modeling : International Journal of Impact Mechanics, 2010, V37, 274-284.

C. Rogueda-Berriet, N. Bahlouli, D. Pessey, Mechanical behavior of recycled PP compounds: tensile, bending and creep tests, Journal of Engineering Materials and Technology, 133 (3), art. no. 030907

Roth S, Raul JS, Willinger R : Finite elements modelling of paediatric head impact. Global validation against experimental data. Computer Methods and Programs in Biomed, 2010, 99, 25-33.

Safdari, M., Baniassadi, M., Ghazavizadeh, A., Ruch, D., Ahzi, S. : Numerical simulation of synthetic microstructured fibrillar adhesive pads, (2010) ASME International Mechanical Engineering Congress and Exposition, Proceedings, 12 (PART A), pp. 173-177.

Safdari, M., Baniassadi, M., Asiaei, S., Garmestani, H., Ahzi, S. : Modeling of biologically inspired adhesive pads using Monte Carlo analysis, (2010) Journal of Adhesion Science and Technology, 24 (7), pp. 1207-1220.

Sperandio, C., Laachachi, A., Ruch, D., Poilâne, C., Bourson, P., Salvestrini, J.-P., Ahzi, S. : Use of functionalized nanosilica to improve thermo-mechanical properties of epoxy adhesive joint bonding aluminium substrates, (2010) Journal of Nanoscience and Nanotechnology, 10 (4), pp. 2844-2849.

2009

Ahzi, S., Patlazhan, S., Remond, Y., Khaleel, M. : Third international conference on polymer behavior: "multiphysics approaches for the behavior of polymers and polymer-based nanomaterials", (2009) Applied Rheology, 19 (4), pp. 247-249.

N. Bahlouli, C. Gauthier, J.M. Pelletier, D. Pessey : Micromechanical approach of the dynamic behavior of a high impact PP and PP compound: recycling and pollution effects, J. Phys. IV, 1   pp: 703-708, 2009.

Chakroun M., Ben Ghozlen H., Elloumi, I., Willinger R. : Détermination du module d’élasticité de la matière cérébrale. CR de Physique, Elsevier, 2009, (10), 236-241.

Deck C., Willinger R., “The current state of the Human Head FE modelling”, International Journal of Vehicle Safety, 2009, Vol. 4, No 2, 58-112.

Deck C., Willinger R., “Head Injury Prediction Tool for Protective Systems Optimization”, 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Deck C., Willinger R., “Improved model based head injury criteria” SimBio-M Conference, 1-3 July 2009, Juan les Pins, France.

Dong, L., Makradi, A., Ahzi, S., Remond, Y. : Three-dimensional transient finite element analysis of the selective laser sintering process, (2009) Journal of Materials Processing Technology, 209 (2), pp. 700-706.

Feist F., Gugler J., Arregui-Dalmases C., Del Pozo de Dios E., Lopez-Valdèz F., Deck C., Willinger R., Pedestrian Collisions with flat fronted vehicles:Injury patterns and importance of rotational accelerations as a predictor for traumatic brain injury (TBI), 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV), 15-18 June 2009, Stuttgart, Germany.

Ipek H., Deck C., Luce H., De Gueselle P., Mayer C., Willinger R., Coupling of Strasbourg University Head Model to THUMS human body FE model:Validation and application to Automotive Safety, 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV), 15-18 June 2009, Stuttgart, Germany.

Joulaee, N., Makradi, A., Ahzi, S., Khaleel, M.A., Koeppel, B.K. : Prediction of crack propagation paths in the unit cell of sofc stacks, (2009) International Journal of Mechanics and Materials in Design, 5 (3), pp. 217-230.

Li, D.S., Garmestani, H., Ahzi, S., Khaleel, M., Ruch, D. : Microstructure design to improve wear resistance in bioimplant UHMWPE materials, (2009) Journal of Engineering Materials and Technology, Transactions of the ASME, 131 (4), pp. 0412111-0412117.

Marjoux, D., Bourdet, N., and Willinger, R. . Computation of axonal elongations: towards a new brain injury criterion. International Journal of Vehicle Safety, 2009, Vol.4 No 4, pp.271-284.

Matadi, R., Makradi, A., Ahzi, S., Sieffert, J.G., Etienne, S., Rush, D., Vaudemont, R., Muller, R., Bouquey, M. : Preparation, structural characterization, and thermomechanical properties of poly(methyl methacrylate)/organoclay nanocomposites by melt intercalation, (2009) Journal of Nanoscience and Nanotechnology, 9 (5), pp. 2923-2930.

Mathis, R., Remond, Y. : Kinematic and dynamic simulation of epicyclic gear trains, (2009) Mechanism and Machine Theory, 44 (2), pp. 412-424.

M'Guil, S., Ahzi, S., Youssef, H., Baniassadi, M., Gracio, J.J. : A comparison of viscoplastic intermediate approaches for deformation texture evolution in face-centered cubic polycrystals, (2009) Acta Materialia, 57 (8), pp. 2496-2508.

M'Guil, S., Ahzi, S., Barlat, F., Gracio, J.J. : Predictions of polycrystalline yield surfaces for FCC metals using a new viscoplastic intermediate approach, (2009) International Journal of Material Forming, 2 (SUPPL. 1), pp. 399-402.

M'Guil, S., Ahzi, S., Gracio, J.J. : Analysis of texture evolution in hcp polycrystals using a viscoplastic intermediate approach, (2009) International Journal of Material Forming, 2 (SUPPL. 1), pp. 57-60.

Meyer F, Willinger R : Three years old child head-neck FE modelling : Simulation of the interaction with the air bag in front and side impact. Int. J of Vehicle Safety. 2009, Vol 4 N°4, 285-299.

Mikdam, A., Makradi, A., Ahzi, S., Garmestani, H., Li, D.S., Y. Remond : A new approximation for the three-point probability function (2009) International Journal of Solids and Structures, 46 (21), pp. 3782-3787.

Mikdam, A., Makradi, A., Ahzi, S., Garmestani, H., Li, D.S., Remond, Y. : Effective conductivity in isotropic heterogeneous media using a strong-contrast statistical continuum theory, (2009) Journal of the Mechanics and Physics of Solids, 57 (1), pp. 76-86.

Milhans, J., Ahzi, S., Garmestani, H., Khaleel, M.A., Sun, X., Koeppel, B.J. : Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials, (2009) Materials and Design, 30 (5), pp. 1667-1673.

Munsch M., Anderson R., Deck C., Ludes B., Willinger R., Influence of head boundary conditions in pedestrian real world head trauma simulations. Proceeding of the IRCOBI Conference, York, UK, 2009.

Munsch M., Bourdet N., Deck C., Willinger R., Lateral Glazing characterization under head impact:Experimental and numerical investigation, 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV), 15-18 June 2009, Stuttgart, Germany.

Oudry J, Bastard C., Miette V., Willinger R., Sandrin L : Copolymer-in-oil phantom materials for elastography. Ultrasound in Med & Biol. 2009, Vol 35, N7, 1185-1197.

J. Oudry, J. Vappou, P. Choquet, R. Willinger, L. Sandrin, and A. Constantinesco, Ultrasound-based Transient Elastography compared to Magnetic Resonance Elastography in soft tissue-mimicking gels, Phys Med Biol, 2009, N°54, 6979-6990.

Oudry J, J. Chen, K.J. Glaser, V. Miette, L. Sandrin, R.L. Ehman, Cross-Validation of Magnetic Resonance Elastography and Ultrasound-Based Transient Elastography: A Preliminary Phantom Study, J Magn Res, accepted, 2009.

J Oudry, N Perichon, S Chatelin, P Allemann, L Soler, R Willinger, L Sandrin. Validation of Ultrasound-based Transient Elastography by means of Dynamic mechanical Analysis: Application to In vivo/In vitro Porcine Liver, Proceedings of the IEEE International Ultrasonics Symposium, 2009, Roma, Italy, p.206.

Périchon N., Oudry J., Chatelin S., Sandrin L., Allemann P., Soler L., Willinger R. In vivo liver tissue mechanical properties by transient elastography : Comparison with dynamic mechanical analysis. Proceeding of the IRCOBI Conference, York, UK, 2009.

Roth S, Vappou J., Raul JS, Willinger R :Child head injury criteria investigation through numerical simulation of real world trauma. Comput Methods Programs Biomed 2009, Vol.93,pp 32-45.

Siddiqui, M.A., Correia, J.P.M., Ahzi, S., Belouettar, S. : Electromagnetic forming process: Estimation of magnetic pressure in tube expansion and numerical simulation, (2009) International Journal of Material Forming, 2 (SUPPL. 1), pp. 649-652.

Tinard V, Deck C. Meyer F., Bourdet N., Willinger R., Influence of pedestrian head surrogate and boundary conditions on head injury risk prediction. Int. J. Crashwortheness, 2009, Vo 14 No 3, 259-268.

2008

Ahzi, S., M'Guil, S. : A new intermediate model for polycrystalline viscoplastic deformation and texture evolution, (2008) Acta Materialia, 56 (19), pp. 5359-5369.

Bourdet N., Willinger R : Human thorax – car seat coupling for rear impact investigation. Accepted in Journal of Sound and Vibration. 2008, Vol 313/3-5 pp 891-907

Campagne-Lambert, L., Daridon, L., Oussouaddi, O., Ahzi, S., Sun, X. : Simulation of the Taylor impact test and analysis of damage evolution using a nucleation and growth based approach, (2008) Modelling, Measurement and Control B, 77 (3-4), pp. 19-35.

S Chatelin, J Vappou, E Breton, C Goetz, P Choquet, R Willinger, A Constantinesco. Visco-Elastic Properties of Ex-Vivo and In-Vivo Brain Tissue by Low Field MR-Elastography, Proceedings of the 7th International Conference on the Ultrasonic Measurement and Imaging of Tissue Elasticity, 2008, Lake Travis, Austin, Texas, USA, p.30.

Chivrac, F., Gueguen, O., Pollet, E., Ahzi, S., Makradi, A., Averous, L. : Micromechanical modeling and characterization of the effective properties in starch-based nano-biocomposites, (2008) Acta Biomaterialia, 4 (6), pp. 1707-1714.

Correia, J.P.M., Siddiqui, M.A., Ahzi, S., Belouettar, S., Davies, R. : A simple model to simulate electromagnetic sheet free bulging process, (2008) International Journal of Mechanical Sciences, 50 (10-11), pp. 1466-1475.

Deck C., Willinger R., “Improved head injury criteria based on head FE model”, International Journal of Crashworthiness, Vol 13, No 6, pp. 667-678, 2008.

Dong, L., Makradi, A., Ahzi, S., Remond, Y., Sun, X. : Simulation of the densification of semicrystalline polymer powders during the selective laser sintering process: Application to Nylon 12, (2008) Polymer Science - Series A, 50 (6), pp. 704-709.

Gueguen, O., Ahzi, S., Belouettar, S., Makradi, A. : Comparison of micromechanical models for the prediction of the effective elastic properties of semicrystalline polymers: Application to polyethylene, (2008) Polymer Science - Series A, 50 (5), pp. 523-532.

Gueguen, O., Richeton, J., Ahzi, S., Makradi, A. : Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers, (2008) Acta Materialia, 56 (7), pp. 1650-1655.

Hostettler, A., Nicolau, S.A., Soler, L., Rémond, Y., Marescaux, J. : A real-time predictive simulation of abdominal organ positions induced by free breathing, (2008) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 5104 LNCS, pp. 89-97.

Husson, C., Correia, J.P.M., Daridon, L., Ahzi, S. : Finite elements simulations of thin copper sheets blanking: Study of blanking parameters on sheared edge quality, (2008) Journal of Materials Processing Technology, 199 (1), pp. 74-83.

Li, D.S., Garmestani, H., Chu, A.O., Ahzi, H., Alapati, G., Khatonabadi, M., Es-Said, O., Siniawski, M.T., Matrisciano, L., Ahzi, S. : Wear resistance and microstructure in annealed ultra high molecular weight polyethylenes, (2008) Polymer Science - Series A, 50 (5), pp. 533-537.

Makradi, A., Ahzi, S., Belouettar, S., Ruch, D. : Thermoforming process of semicrystalline polymeric sheets: Modeling and finite element simulations, (2008) Polymer Science - Series A, 50 (5), pp. 550-557.

Patlazhan, S.A., Rémond, Y. : International colloquium "structure-Sensitive Mechanics of Polymer Materials: Physical and Mechanical Aspects", (2008) Polymer Science - Series A, 50 (5), pp. 481-482.

Patlazhan, S.A., Hizoum, K., Rémond, Y. : Stress-strain behavior of high-density polyethylene below the yield point: Effect of unloading rate, (2008) Polymer Science - Series A, 50 (5), pp. 507-513.

D. Pessey, N. Bahlouli, S. Ahzi and M.A. Khaleel : Strain Rate Effects on the Mechanical Response of Composite Based Polypropylene Deformed at Small Strains, (2008) Polymer Science - Series A 50 (6), pp. 690-697.

Pessey, D., Bahlouli, N., Ahzi, S., Khaleel, M.A. : Strain rate effects on the mechanical response of polypropylene-based composites deformed at small strains, (2008) Polymer Science - Series A, 50 (6), pp. 690-697.

Pessey, D., Bahlouli, N., Pattofato, S., Ahzi, S. : Polymer composites for the automotive industry: Characterization of the recycling effect on the strain rate sensitivity, International Journal of Crashworthiness 13 (4), (2008) pp. 411-424.

Raul JS, Roth S, Ludes B, Willinger R : Influence of the benign enlargement of the subarachnoid space on the bridging veins strain during a shaking event : a finite element study. Int. J. Legal Med 2008, DoI 10.I007/s00414-008-0242-6.

Raul JS, Deck C, Ludes B, Willinger R : Finite element models of the human head and their applications in forensic practice. Int.J.Legal Med 2008, DoI 10.I007/s00414-008-0248-0.

Roth S, Raul JS, Willinger R : Biofidelic child head FE model to simulate real world head trauma. Comp Models and Prog in Biomed. 2008-90, 262-274.

Shokuhfar, T., Makradi, A., Titus, E., Cabral, G., Ahzi, S., Sousa, A.C.M., Belouettar, S., Gracio, J. : Prediction of the mechanical properties of hydroxyapatite/polymethyl methacrylate/carbon nanotubes nanocomposite, (2008) Journal of Nanoscience and Nanotechnology, 8 (8), pp. 4279-4284.

Siddiqui, M.A., Correia, J.P.M., Ahzi, S., Belouettar, S. : A numerical model to simulate electromagnetic sheet metal forming process, (2008) International Journal of Material Forming, 1 (SUPPL. 1), pp. 1387-1390.

Singh, M.K., Shokuhfar, T., De Almeida Gracio, J.J., De Sousa, A.C.M., Da Fonte Fereira, J.M., Garmestani, H., Ahzi, S. : Hydroxyapatite modified with carbon-nanotube-reinforced poly(methyl methacrylate): A nanocomposite material for biomedical applications, (2008) Advanced Functional Materials, 18 (5), pp. 694-700.

Spieckermann, F., Wilhelm, H., Schafler, E., Ahzi, S., Zehetbauer, M.J. : Application of composite models to isotactic polypropylene for the determination of phase specific stress-strain curves, (2008) Materials Science and Engineering A, 483-484 (1-2 C), pp. 76-78.

2007

S. Ahzi, N. Bahlouli, A. Makradi, S. Belouettar : Composite Modeling for the Effective Elastic Properties of Semi-Crystalline Polymers, Journal of Mechanics of Materials and Structures , 2, n°1, pp. 1-22, 2007.

Baumgartner D., Marjoux D., Willinger R. : Primary and secondary impact of pedestrian head. Enhanced Safety Vehcle Conf. Lyon 2007.

Deck C, Baumgartner D, Willinger R : Influence of rotational acceleration on intracranial mechanical parameters under accidental circumstances. Conf. Proceed of IRCOBI 2007, 185-197.

Correia, J.P.M., Simões, F., Gracio, J.J., Barlat, F., Ahzi, S. : A simple hardening rule accounting for time-dependent behavior in Al-Mg-Si alloys, (2007) Materials Science and Engineering A, 456 (1-2), pp. 170-179.

Dong, L., Makradi, A., Ahzi, S., Remond, Y. : Finite element analysis of temperature and density distributions in selective laser sintering process, (2007) Materials Science Forum, 553, pp. 75-80.

K. Hizoum, Y. Rémond, N. Bahlouli, V. Oshmiyan, S. Patlazan AND S. Ahzi : Non linear strain rate dependency and unloading behavior of semi crystalline polymers: Overview of some constitutive models. Oil and Gas Science and Technology 61 (6), pp. 743-749.2007.

Hostettler, A., Nicolau, S.A., Soler, L., Rémond, Y. : Toward an accurate real-time simulation of internal organ motions during free breathing from skin motion tracking and an a priori knowledge of the diaphragm motion, (2007) Computer-Assisted Radiology and Surgery, 2 (1 SUPPL.), pp. S100-S102.

Joulaee, N., Makradi, A., Ahzi, S., Khaleel, M.A. : Fracture toughness and crack deflection in porous multilayered ceramics: Application to NiO-YSZ, (2007) Materials Science Forum, 553, pp. 69-74.

Li, D.S., Garmestani, H., Ahzi, S. : Processing path optimization to achieve desired texture in polycrystalline materials, (2007) Acta Materialia, 55 (2), pp. 647-654.

Makradi, A., Belouettar, S., Ahzi, S., Puissant, S. : Thermoforming process of amorphous polymeric sheets: Modeling and finite element simulations, (2007) Journal of Applied Polymer Science, 106 (3), pp. 1718-1724.

Marjoux D., Deck C., Baumgartner D., WillingerR. : Head Injury Prediction Capability of the HIC, HIP, SIMon And ULP Criteria. Accident Analysis and Prevention, 2007, Vol 40/3 pp 1135-1148

Marjoux D., Willinger R. : Space needed by a decelerating head to keep an imposed HIC at a given impact velocity. Int. J. Vehicle Safety, 2007, Vol2 N°4, 368-377.

Meyer F, Bourdet N, Roth S, Willinger R : Three years old child neck FE modelling under automotive accident conditions. Conf. Proceed of IRCOBI 2007, 277-290

M'Guil, S., Ahzi, S., Youssef, H., Gracio, J., Khaleel, M.A. : Comparison between self-consistent and intermediate approaches for the simulation of large deformation polycrystal viscoplasticity, (2007) Materials Science Forum, 553, pp. 81-86.

Raul JS, Ludes B, Willinger R. : Finite Element Models of the Human Head in the Field of Forensic Science. In Skeletal Trauma : Identification of injuries resulting from human right abuse and armed conflict. Erin H. Kimmerle ISBN 0-8493-9269-1 ; CRC Press 2008

Remond, Y., Patlazhan, S. : The EUROMECH Colloquium 487 "Structure Sensitive Mechanics of Polymer Materials: Physical and mechanical aspects", (2007) Applied Rheology, 17 (2), pp. 108-111.

Richeton, J., Ahzi, S., Vecchio, K.S., Jiang, F.C., Makradi, A. : Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates, (2007) International Journal of Solids and Structures, 44 (24), pp. 7938-7954.

Richeton, J., Ahzi, S., Daridon, L. : Thermodynamic investigation of yield-stress models for amorphous polymers, (2007) Philosophical Magazine, 87 (24), pp. 3629-3643.

Roth S, Raul JS, Willinger R : Limitation of scaling methods in child head finite elements modelling. Int. J. Vehicle Safety, 2007. Vol 2, N°4, pp 405-421.

Schultz, P., Vautier, D., Charpiot, A., Lavalle, P., Debry, C. : Development of tracheal prostheses made of porous titanium: A study on sheep, (2007) European Archives of Oto-Rhino-Laryngology, 264 (4), pp. 433-438.

Schultz, P., Charpiot, A., Edrissi, M., Fauvet, F., Donato, L., Debry, C. : Bilateral vocal cords paralysis in newborn [Paralysies bilatérales des cordes vocales chez le nouveau-né], (2007) Annales d'Oto-Laryngologie et de Chirurgie Cervico-Faciale, 124 (3), pp. 103-109.

Tinard V., Bourdet N., Deck C., Willinger R. : Active pedestrian head protection against windscreen impact. Enhanced Safety Vehicle Conf. Lyon 2007

Vappou J., Breton E, Choquet P, Goetz C., Willinger R., Constantinesco A. : Magnetic resonance elastography compared with rotational rheometry for in vitro brain tissue viscoelasticity measurment. Accepté dans MAGMA en decembre 2007.

2006

N. Bahlouli, D. Pessey, S. Ahzi, Y. Rémond, Mechanical behavior of composite based polypropylene : recycling and strain rate effect, J. Phys. IV France, 134 (2006) 1319-1323.

Bourdet N, Willinger R :Modelling of car seat and human boddy interaction under rear impact. International Journal of Crashworthiness,2006, Vol. 11, No 6, pp. 553-560

Charpiot, A., Chambres, O., Herve, J.F., Million, P., Riedinger, A.M., Hemar, P. : Osteointegrated cranio-facial implants: 49 Patients report [Implants ostéointégrés cranio-faciaux. A propos de 49 patients], (2006) Revue de Laryngologie Otologie Rhinologie, 127 (4), pp. 217-222.

Deck C, Willinger R : Multidirectioal optimisation against biomechanical criteria of a coupled head-helmet model. International Journal of Crashworthiness, 2006, Vol. 11, No 6, pp. 561-572.

Dupuis R, Meyer F, Deck C, Willinger R. Three year old child neck finite element modelization . Eur J Orthop Surg. Traumato (2006), s00590-005-0068-6.

C. Gontier, D. George and M. Raffy, Energetic mode contributions in stochastic modal analysis: An application to mode classification, Journal of Sound and Vibration, 2006, vol. 294, Issue 4-5, pp 944-965

Hizoum, K., Rémond, Y., Bahlouli, N., Oshmyan, V., Patlazhan, S., Ahzi, S. : Non linear strain rate dependency and unloading behavior of semi-crystalline polymers, (2006) Oil and Gas Science and Technology, 61 (6), pp. 743-749.

Husson, Ch., Ahzi, S., Daridon, L. : High-speed blanking of copper alloy sheets: Material modeling and simulation, (2006) Journal De Physique. IV : JP, 134, pp. 1189-1194.

Hostettler, A., Nicolau, S.A., Forest, C., Soler, L., Remond, Y. : Real time simulation of organ motions induced by breathing: First evaluation on patient data, (2006) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 4072 LNCS, pp. 9-18.

Makradi, A., Cox, C.L., Ahzi, S., Belouettar, S. : Postspinning draw of polymeric fibers: Multiscale micromechanical model for a solid polymer under finite deformation and strain-induced crystallization, (2006) Journal of Applied Polymer Science, 100 (3), pp. 2259-2266.

Marjoux D, Baumgartner D, Deck C, Willinger R : Head injury prediction capability of HIC, HIP, SIMON and ULP criteria. Proceed. of the International Research Council on Biokinetics of Impacts : IRCOBI 2006, 143-158

Nguyen, B.N., Koeppel, B.J., Ahzi, S., Khaleel, M.A., Singh, P. : Crack growth in solid oxide fuel cell materials: From discrete to continuum damage modeling, (2006) Journal of the American Ceramic Society, 89 (4), pp. 1358-1368.

Oshmyan, V.G., Patlazhan, S.A., Remond, Y. : Principles of structural-mechanical modeling of polymers and composites, (2006) Polymer Science - Series A, 48 (9), pp. 1004-1013.

Oussouaddi, O., Campagne, L., Daridon, L., Ahzi, S. : A physically-based and fully coupled model of elasto-plasticity and damage for dynamic failure in ductile metals, (2006) Journal De Physique. IV : JP, 134, pp. 293-298.

Oussouaddi, O., Daridon, L., Chrysochoos, A., Ahzi, S. : On the shear band spacing in stainless steel 304L, (2006) Journal De Physique. IV : JP, 134, pp. 287-291.

Raul JS, Deck C, Meyer F, Geraut A, Willinger R, Ludes B : A finite element model investigation of gunshot injury. International Journal of Legal Medicine, 2006, pp 1–4

Raul JS, Baumgartner D, Ludes B, Willinger R : Finite element modelling of head injuries caused by a fall. Int J of Leg. Med.,2006, V 120, pp 212-218.

Richeton, J., Ahzi, S., Makradi, A., Vecchio, K.S. : Constitutive modeling of polymer materials at impact loading rates, (2006) Journal De Physique. IV : JP, 134, pp. 103-107.

Richeton, J., Ahzi, S., Vecchio, K.S., Jiang, F.C., Adharapurapu, R.R. : Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress, (2006) International Journal of Solids and Structures, 43 (7-8), pp. 2318-2335.

Roth S, Raul JS, Lude B, Willinger R : Finite element analysis of impact and shaking inflicted to child. Int. J. Legal Med 2006,DoI 10.I007/s00414-006-0129-3

Roth S, Raul JS, Willinger R : Limitation on scaling methods in child head modelling. Proceed. of the International Research Council on Biokinetics of Impacts : IRCOBI 2006, 365-368

Vappou J., Willinger R., Breton E., Choquet P., Goetz C., Constantinesco A., “Dynamic viscoelastic shear properties of soft matter by Magnetic Resonance Elastography using a low-field dedicated system”, J. Rheol, 2006, Vol 50, Issue 4, pp531, 541.

2005

Ahzi, S., M'Guil, S. : Simulation of deformation texture evolution using an intermediate model, (2005) Diffusion and Defect Data Pt.B: Solid State Phenomena, 105, pp. 251-258.

Ahzi, S., M'Guil, S., Youssef, H., Khaleel, M., Gracio, J. : Non-linear viscoplastic polycrystalline intermediate modelling for texture evolution in FCC metals: Compression test, (2005) Materialwissenschaft und Werkstofftechnik, 36 (10), pp. 533-537.

Baumgartner D, Willinger R. : Human head tolerance limits to specific injury mechanisms inferred from real world accident numerical reconstruction. Rev. Européenne des éléments finis : 2005, V4, N°4-5, 421-443.

Baumgartner D, Willinger R. : Finite element modelling of human head injuries caused by ballistic projectiles. Rev. Européenne des éléments finis : 2005, V4, N°4-5, 559-576.

P. J. Bouchard, D. George, J. R. Santisteban, G. Bruno, M. Dutta, L. Edwards, E. Kingston and D. J. Smith, Measurement of the Residual Stresses in a Stainless Steel Pipe Girth Weld Containing Long and Short Repairs, International Journal of Pressure Vessels and Piping, 2005, Vol. 82, Issue 4, pp. 299-310.

Bouhattate, J., Li, D., Garmestani, H., Ahzi, S., Khaleel, M. : On improving predictions of texture evolution using processing path model, (2005) Materialwissenschaft und Werkstofftechnik, 36 (10), pp. 538-540.

Bourdet N., Fischer R., Willinger R. : Human neck characterisation under thoracic vibration – Inter individual and gender influence. Proceed. of the International Research Council on Biokinetics of Impacts : IRCOBI 2005, 257-267

Bourdet N, Willinger R : Human body-car seat coupling under rear impact. Proceedings of the 2005 ESVConf. paper 261 pp 1-13, Washington DC June 2005.

Campagne, L., Daridon, L., Ahzi, S. : A physically based model for dynamic failure in ductile metals, (2005) Mechanics of Materials, 37 (8), pp. 869-886.

Dupuis R., Meyer F. WillingerR. : Three years old child neck FE modelling Proceedings of the 2005 ESVConf. paper 081 pp 1-9, Washington DC June 2005.

D. George and D. J. Smith, Through Thickness Measurement of Residual Stresses in a Stainless Steel Cylinder Containing Shallow and Deep Weld Repairs, International Journal of Pressure Vessels and Piping, 2005, Vol. 82, Issue 4, pp. 279-287.

Makradi, A., Ahzi, S., Gregory, R.V., Edie, D.D. : A two-phase self-consistent model for the deformation and phase transformation behavior of polymers above the glass transition temperature: Application to PET, (2005) International Journal of Plasticity, 21 (4), pp. 741-758.

Meyer F., Bourdet N., Willinger R. : Experimental and numerical modal analysis of the human head neck system. Int. J of Vehicle Safety, 2005, Vol 1,.n°1, 145-167.

M'Guil, S., Ahzi, S. : An intermediate viscoplastic model for deformation texture evolution in polycrystals, (2005) Materials Science Forum, 495-497 (PART 2), pp. 989-994.

Nicolle, S., Lounis, M., Willinger, R. and Palierne J-F. (2005). Shear Linear Behavior of Brain Tissue over a Large Frequency Range. Biorheology 42(3), 209-223.

Oshmyan, V.G., Patlazhan, S.A., Remond, Y. : The effect of structural changes and nonlinear character of plastic flow on low strains of semicrystalline polymers, (2005) Vysokomolekularnye Soedineniya. Ser.A Ser.B Ser.C - Kratkie Soobshcheniya, 47 (4), pp. 606-607.

Oshmyan, V.G., Patlazhan, S.A., Rémond, Y. : The effect of structural changes and nonlinear character of plastic flow on low strains in semicrystalline polymers, (2005) Polymer Science - Series A, 47 (4), pp. 346-351.

Rémond, Y. : Constitutive modelling of viscoelastic unloading of short glass fibre-reinforced polyethylene, (2005) Composites Science and Technology, 65 (3-4), pp. 421-428.

Rémond, Y. : Guest editorial, (2005) Composites Science and Technology, 65 (3-4), pp. 351-352.

Richeton, J., Ahzi, S., Daridon, L., Rémond, Y. : Yield and post-yield modeling of amorphous polymers: Application of the cooperative model for high strain rates, (2005) Vysokomolekularnye Soedineniya. Ser.A Ser.B Ser.C - Kratkie Soobshcheniya, 47 (4), pp. 589-590.

Richeton, J., Schlatter, G., Vecchio, K.S., Rémond, Y., Ahzi, S. : A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates, (2005) Polymer, 46 (19 SPEC. ISS.), pp. 8194-8201.

Richeton, J., Ahzi, S., Daridon, L., Rémond, Y. : A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures, (2005) Polymer, 46 (16), pp. 6035-6043.

Richeton, J., Ahzi, S., Daridon, L., Rémond, Y. : Yield and post-yield modeling of solid amorphous polymers: Application of the cooperative model for high strain rates, (2005) Polymer Science - Series A, 47 (4), pp. 332-338.

Willinger R, Bourdet N, Fischer R., Legal F: Modal analysis of the human head neck in vivo as a criteria for crash test dummy evaluation. J. of Sound and Vib,2005,V287-3, 405-431

Wu, Z., Ahzi, S., Arruda, E.M., Makradi, A. : Modeling the large inelastic deformation response of non-filled and silica filled SL5170 cured resin, (2005) Journal of Materials Science, 40 (17), pp. 4605-4612.

2004

N. Bahlouli, S. M’Guil, S. Ahzi AND M. Laberge : Stress-Strain Response of Biomaterials by a Digital Image Correlation Method: Application to Tecoflex®. J. of Material Science and Technology, 20, pp. 114-116, 2004.

M. Chakroun, M. Zagrouba, I. Elloumi : Modélisation du comportement vibratoire de la matière cérébrale : Modèle de Maxwell semi-linéaire. Rhéologie (2004), Vol6, 67-73

Daridon, L., Oussouaddi, O., Ahzi, S. : Influence of the material constitutive models on the adiabatic shear band spacing: MTS, power law and Johnson-Cook models, (2004) International Journal of Solids and Structures, 41 (11-12), pp. 3109-3124.

C. Deck, S. Nicolle, R. Willinger : Human head FE modelling : Improvement of skull geometry and brain constitutive laws. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI) 2004, pp79-92

C. Deck, R. Willinger, H.D. Wehner : Tödliches Schädelhirntrauma bei einem Kleinkind. Teil II : Biomechanishe Rekonstruktion. Arch. Für Kriminologie. 2004, 214, 48-55.

C. Husson, C. Poizat, N. Bahlouli, S. Ahzi, T. Courtin, L. Merle : On plasticity and damage evolution during sheet metal forming, IUTAM Symposium On Multi scale modelling and characterization of elastic-inelastic behaviour of engineering materials, Marrakech , (IUTAM symposium). S. Ahzi et al. eds., Kluwer Academic Publishers, pp243-250, 2004.

De Magalhães Correia, J.P., Ferron, G. : Wrinkling of anisotropic metal sheets under deep-drawing: Analytical and numerical study, (2004) Journal of Materials Processing Technology, 155-156 (1-3), pp. 1604-1610.

McGrath, Neal M., Baumgartner D., Willinger R. : The effect on human head model predictions of representing the skull as a rigid body. I MECH E –Vehicle Safety 2004, pp 100-109.

Meyer F, Willinger R, Legal F : The importance of modal validation for biomechanical models ; application to the cervical spine. Finite elements in analysis and design, 2004, vol 40, 1835-1855.

Meyer, Willinger Bourdet Legal Deck : FE modelling of the human head neck : Modal analysis and validation in the frequency domain. Int. J. of Crashwothiness, 2004,Vol.9, N°5, 535-545.

Meyer F., Bourdet N., Deck C., Raul JS., Willinger R. : Human neck FE model development and validation against original experimental data. Stapp Car Crash J. 2004, Vol 48, 177-206

Neal M., McGrath, Baumgartner D., Willinger R. : Comparative study between FE human head and dummy head model response under impact. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI)2004, pp 69-78

Nguyen, B.N., Koeppel, B.J., Singh, P., Khaleel, M.A., Ahzi, S. : Numerical characterization of the fracture behavior of solid oxide fuel cell materials by means of modified boundary layer modeling, (2004) Ceramic Engineering and Science Proceedings, 25 (3), pp. 393-399.

Nicolle S., Lounis M., Willinger R : Shear properties of brain tissue over a frequency range relevant for automotive impact situations : New experimental data. Stapp Car Crash J. 2004, Vol 48, 239-258

Oshmyan, V., Patlazhan, S., Remond, Y. : Simulation of small-strain deformations of semi-crystalline polymer: Coupling of structural transformations with stress-strain response, (2004) Journal of Materials Science, 39 (11), pp. 3577-3586.

Raul J.S., Deck C., Meyer F., Géraut A., Traqui A., Willinger R., Ludes B., « Suicide (2004) par trois coup de feu. Une étude biomécanique » Journal de médecine légale droit médical, Vol 45, n°7-8, pp 432-437.

Rémond, Y., Védrines, M. : Measurement of local elastic properties of injection moulded polymer structures by analysis of flexural resonant frequencies. Applications in POM, PA66, filled PA 66, (2004) Polymer Testing, 23 (3), pp. 267-274.

2003

Ahzi, S., Makradi, A., Gregory, R.V., Edie, D.D. : Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperature, (2003) Mechanics of Materials, 35 (12), pp. 1139-1148.

D. Baumgartner, R. Willinger : Finite element modelling of human head injuries caused by ballistic projectiles. Proceed of NATO/RTO Conf, Koblenz, May 2003.

D. Baumgartner and R. Willinger :Human head tolerance limits against impact derived from numerical real world accidents reconstruction. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

N. Bourdet, R. Willinger, B. Schwaller, F. Le Gall* : Analysis of the modal behaviour of the head-neck system in vivo. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

Campagne, L., Daridon, L., Ahzi, S. : Modeling and simulation of dynamic failure in metals, (2003) Journal De Physique. IV : JP, 110, pp. 147-152.

C. Deck, R. Willinger, D. Baumgartner : Helmet optimisation based on head-helmet modelling. Proceed of OPTI Conf. Detroit, 2003.

C. Deck, R. Willinger, D. Baumgartner : Modelling of the human head-helmet interaction. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

R. Fischer, N. Bourdet, R. Willinger, F. Le Gall : Devlopment and validation of a new human neck physical model. Proceed of TEST 03 Conf. Nurenberg 2003

Husson, C., Ahzi, S., Daridon, L., Courtin, T. : Continuum damage modeling for ductile metals under high strain rate deformation, (2003) Journal De Physique. IV : JP, 110, pp. 63-68.

F. Meyer, R. Willinger, N. Bourdet .Modal analysis of a head-neck finite element model. Proceed. of NAFEMS Conf. Orlando, 2003

De Magalhaes Correia, J.P., Ferron, G. : Wrinkling of anisotropic sheet metals under deep drawing, (2003) Journal De Physique. IV : JP, 105, pp. 89-96.

De Magalhães Correia, J.P., Ferron, G., Moreira, L.P. : Analytical and numerical investigation of wrinkling for deep-drawn anisotropic metal sheets, (2003) International Journal of Mechanical Sciences, 45 (6-7), pp. 1167-1180.

A. Niass, R. Dupuis, R. Willinger : Evaluation des blessures de la face en situation d’impact à partir d’un modèle éléments finis. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

S. Nicolle, R. Willinger, L. Mourad : High frequency modelling of porcine brain tissue. Int. Conf on Computational Methods and Exp. Measurements, Halkidiki 2003.

Richeton, J., Ahzi, S., Daridon, L., Rémond, Y. : Modeling of strain rates and temperature effects on the yield behavior of amorphous polymers, (2003) Journal De Physique. IV : JP, 110, pp. 39-44.

R. Willinger, N. Bourdet, R. Fischer, F. Le Gall :New Methode for biofidelity evaluation of dummy necks. Paper 343 ESV Conf. Nagoya, Japan, 2003

R. Willinger, D. Baumgartner : Numerical and physical modelling of the human head under impact – Towards new injury criteria. Int. J Vehicle Design, Vol.31, N1/2, 2003, pp 94-115

R. Willinger, D. Baumgartner : Human head tolerance limits to specific injury mechanisms. Int. J. of Crashwothiness, 2003, Vol 8 N°6,605-617.

2002

Ahzi, S., M'Guil, S., Agah-Tehrani, A. : A new formulation for the elastic-viscoplastic lower bound and intermediate modeling for polycrystalline plasticity, (2002) Materials Science Forum, 408-412 (I), pp. 463-468.

Ahzi, S., Ganesan, A., Arruda, E. : Modeling and simulation of deformation texture in semi-crystalline polymers: Application to polypropylene and nylon-6, (2002) Materials Science Forum, 408-412 (II), pp. 1723-1728.

Ahzi, S., Haque, I., Tombat, S. : Simulation of texture evolution during wire drawing of BSCCO superconductors, (2002) Materials Science Forum, 408-412 (II), pp. 1717-1722.

D. Baumgartner, R. Willinger : Tolerance limits for human brain neurological lesions derived from finite element head impact simulation. J of Hunan Univ., Vol 29, N°6, 2002, 44-56.

D. Baumgartner, R. Willinger, D. Otte, U. Boehnke : In deep analysis of pedestrian head impacts. Injury analysis, accident reconstruction and numerical head impact simulation. Proceedings of the International Crashworthiness Conference (ICRASH 2002) Melbourne, 2002.

Dagli, L., Remond, Y. : Identification of the non-linear behaviour a 4D carbon-carbon material designed for aeronautic application, (2002) Applied Composite Materials, 9 (1), pp. 1-15.

D. George, E. Kingston and D. J. Smith, Measurement of Through Thickness Stresses Using Small Holes, Journal of Strain Analysis for Engineering Design, 2002, vol. 37, no. 2, pp. 125-139.

C. Husson, N. Bahlouli, S. M'Guil, S. Ahzi., Mechanical characterization of thin sheets by a digital image correlation method , J. Phys IV, pr11.393- 400, 2002.

Lee, B.J., Ahzi, S., Parks, D.M. : Bicrystal-based modeling of plasticity in FCC metals, (2002) Journal of Engineering Materials and Technology, Transactions of the ASME, 124 (1), pp. 27-40.

De Magalhães Correia, J.P., Ferron, G. : Wrinkling predictions in the deep-drawing process of anisotropic metal sheets (2002) Journal of Materials Processing Technology, 128 (1-3), pp. 178-190.

Mathis, R., Remond, Y. : Solving the kinematic inverse problem for epicyclic gear trains, (2002) VDI Berichte, 1 (1665), pp. 479-489.

Oussouaddi, O., Ahzi, S., Zeghloul, A., Bouami, D. : Shear band propagation in a mild steel double-notch specimen under impact loading, (2002) Modelling, Measurement and Control B, 71 (7-8), pp. 23-32.

C. Poizat, C. Husson, S. Ahzi, N. Bahlouli, L. Merle : Modeling of thin sheet blanking with a micromechanical approach, International Journal of forming process 5 N° 2-3-4, pp. 423-432, 2002.

E. Schuller, Schinn B., Doyle D, Makitupa S., Otte D., Willinger R. : Prediction of head and neck Injury Severity and tolerance for helmeted motorcycle riders involved in traffic accidents. Proceedings of the International Crashworthiness Conference (ICRASH 2002) Melbourne, 2002.

J. Sübke, HD Wehner, R Willinger, K. Wolf : Tödliches Schädelhirntrauma bei einem Kleinkind. Teil I : Forensische Dokumentation, Modellgenerierung und geometrische Impactbedingungen. Arch. Für Kriminologie. 2002,209:147-157

Stehly, M., Remond, Y. : On numerical simulation of cyclic viscoplastic and viscoelastic constitutive laws with the large time increment method, (2002) Mechanics Time-Dependent Materials, 6 (2), pp. 147-170.

R. Willinger, BM Diaw, D. Baumgartner, B. Chinn : Full face protective helmet modeling and coupling with a human head model. Int. J. of Crashworthiness, 2002, Vol 7, N°2, 167-178.

R. Willinger, N. Bourdet, B.Schwaller, F. Legal: Modal characteristics of the head-neck system in vivo. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Munich, 2002

R. Willinger, N. Bourdet, B. Schwaller, F. Legal : Characterization and modelling of the human head-neck in the frequency domain. Proc. of the 5th Int. Conf. OnVibration Eng., Nanjing 2002, 167-173

2001 et avant

D. Baumgartner, R. Willinger, B. Diaw : FE modelling of a protective helmet. Parametric study and coupling with the human head. NAFEMS world congress 2001, 727-738, Lake Como, Italie, avril 2001.

D. Baumgartner, R. Willinger,: New dummy head prototype : Development, Validation and Injury Criteria. Int. Conf. On Material Testing and Research, Nuremberg, 2001, pp71-76

B. Chinn, B. Canaple, R. Willinger : Motorcycle accident reconstruction. COST 327 “Motorcycle safety helmets” final report Copyright TRL, janvier 2001.

C. Deck, R. Willinger, J Subke, HD Wehner : Severe head trauma of an infant caused by a sculpture. Part II: Biomechanical reconstruction. Computer Methods in Biomechanics & Biomedical Engeenering, Rome Oct. 2001

Garmestani, H., Lin, S., Adams, B.L., Ahzi, S. : Statistical continuum theory for large plastic deformation of polycrystalline materials, (2001) Journal of the Mechanics and Physics of Solids, 49 (3), pp. 589-607.

Hanim, S., Ahzi, S. : A unified approach for pressure and temperature effects in dynamic failure criteria, (2001) International Journal of Plasticity, 17 (9), pp. 1215-1244.

Makradi, A., Ahzi, S., Gregory, R.V. : Effect of non-isothermal oriented crystallization on the velocity and elongational viscosity profiles during the melt spinning of high density polyethylene fibers, (2001) Polymer Engineering and Science, 41 (7), pp. 1107-1114.

N. Shewchenko, M. Beusenberg D. B aumgartner, R. Willinger : Tolerance limits for mild traumatic brain injury derived from numerical head impact replication. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Isle of Man, 2001, 353-355.

J Subke, HD Wehner, R Willinger : Severe head trauma of an infant caused by a sculpture. Part I: Forensic Documentation and model generation Computer Methods in Biomechanics & Biomedical Engeenering, Rome Oct. 2001

R. Willinger, D. Baumgartner, B. Chinn : New dummy head prototype : development, validation and injury criteria . Int. J. of Crashworthiness, 2001, Vol 6, N°3, 281-294.

2000

D. George, E. Kingston and D. J. Smith, Residual Stress Measurement in Thick Section Components, American Society of Mechanical Engineers, Pressures Vessels and Piping Division, PVP Assessment Methodologies for Preventing Failure : Deterministic and Probabilistic Aspects and Weld Residual Stress, 2000, vol. 410-1, pp. 275-278.

D. George and D. J. Smith, The Application of the Deep Hole Technique for Measuring Residual Stresses in an Autofrettaged Tubes, American Society of Mechanical Engineers, Pressures Vessels and Piping Division, PVP High Pressure Technology, 2000, vol. 406, pp. 25-28.

D. George, D. J. Smith and P. J. Bouchard, Evaluation of through wall residual stresses in stainless steel weld repairs, Materials Science Forum, 2000, vol. 347, pp 646-651.

Hanim, Ahzi, S. : Modeling of dynamic failure by nucleation and growth processes, (2000) Journal De Physique. IV : JP, 10 (9), pp. 829-834.

Makradi, A., Ahzi, S., Gregory, R.V. : Modeling of the mechanical response and evolution of optical anisotropy in deformed polyaniline, (2000) Polymer Engineering and Science, 40 (7), pp. 1716-1723.

D. J. Smith, P.J. Bouchard and D. George, Measurement and Prediction of Through Thickness Residual Stresses in Thick Section Welds, Journal of Strain Analysis for Engineering Design, 2000, vol. 35, no. 4, pp. 287-305.

R. Willinger, T. Guimberteau, D. Baugartner : Dynamic characterization of motorcyclist’s helmet. J of Sound and Vibration. 2000, vol.235(4), 611-625.

R. Willinger, BM. Diaw, HS. Kang : Finite element modeling of skull fracture caused by direct impact. Int. J. of Crashworthiness, 2000, Vol.5 N°3, 249-258.

R. Willinger, V. Giavotto, B. Chinn : Mathematical modelling of the helmet-head-neck complex. COST 327 “Motorcycle safety helmets” final report Copyright TRL, mai 2000.

R. Willinger, D. Baumgartner, B. Chinn, M. Neale : Head tolerance limits derived from numerical replication of real world accidents. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Montpellier 2000, 209-221.

R. Willinger. B, Baumgartner. Chinn : New dummy head prototype : development, validation and injury criteria. Proceedings of the International Crashworthiness Conference (ICRASH 2000) London, 2000, 295-305.

1999

Ahzi, S. : Modelling of deformation plasticity and texture evolution in NiAl polycrystals, (1999) Modelling and Simulation in Materials Science and Engineering, 7 (5), pp. 841-850.

N. Bahlouli, J.Y. Cavaillé, M. Garcia-Ramirez, A. Camara. Thermo-mechanical behaviour of PE reinforced by ligno-cellulosic fillers. ACS symposium series v723, biopolymers utilizing Nature’s advanced materials. Edited by S.H. Imam, R.V.greene, B.R.Zaidi, pp65-76, 1999.

Mathis, R., Rémond, Y. : A unified theory of epicydic gear trains [Une theorie unifiee des trains epicycloidaux], (1999) Comptes Rendus de l'Academie de Sciences - Serie IIb: Mecanique, Physique, Chimie, Astronomie, 327 (11), pp. 1115-1121.

Mathis, R., Rémond, Y. : A new approach to solving the inverse problem for compound gear trains, (1999) Journal of Mechanical Design, Transactions of the ASME, 121 (1), pp. 98-105.

Remond, Y., Wagner, C. : Two experimental methods to measure the damaged subsurface of carbon-carbon brake discs, (1999) Applied Composite Materials, 6 (3), pp. 185-201.

R Willinger, HS. Kang, BM. Diaw: Three-dimensional human head finite element model validation against experimental impacts. Annals of Biomed. Eng.1999, 27 (3), 403-410.

R. Willinger, HS. Kang, BM. Diaw : Développement et validation d’un modèle mécanique de la tête humaine. C. R. Acad. Sci. Paris, t.326, Série II b, pp. 125-131, 1999.

R. Willinger, B. Diaw, HS. Kang : Modélisation de la boîte crânienne et du cerveau soumis à un impact. Revue Française de Mécanique n° 1999-3,179-185.

1998

Ahzi, S., Schoenfeld, S.E. : Mechanics of porous polycrystals: A fully anisotropic flow potential, (1998) International Journal of Plasticity, 14 (8), pp. 829-839.

Hines, J.A., Vecchio, K.S., Ahzi, S. : A model for microstructure evolution in adiabatic shear bands, (1998) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 29 (1), pp. 191-203.

Rémond, Y., Wagner, C. : Subsurface damage evaluation on carbon-carbon composite structures after high dissipative wear [Existence d'un endommagement de subsurface sur des composites carbone- carbone apres frottement intense] (1998) Comptes Rendus de l'Academie de Sciences - Serie IIb: Mecanique, Physique, Chimie, Astronomie, 326 (12), pp. 833-838.

R. Willinger, BM. Diaw, HS.Kang : Finite element modeling of the human head – Modal and temporal validation. Int. Conf. on Vib. Eng., Dalian, China 1998, 10 pages

R. Willinger, BM. Diaw, D. Baumgartner : Development and validation of a bicycle helmet finite element model. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Göteborg 1998, pp 549-552.

1997

Arruda, E.M., Ahzi, S., Li, Y., Ganesan, A. : Rate dependent deformation of semi-crystalline polypropylene near room temperature, (1997) Journal of Engineering Materials and Technology, Transactions of the ASME, 119 (3), pp. 216-222.

BM. Diaw, R. Willinger, HS. Kang : Finite element modeling of bone material discontinuity in case of skull fracture. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Hanover 1997, pp 461-463.

HS Kang, R Willinger, BM. Diaw, B. Chinn : Validation of a 3D human head model and replication of head impact in motorcycle accident by finite element modeling. J. of Passenger Cars, 1997, Vol. 106, Sect. 6, Part 1, pp 3849-3858.

HS Kang, R Willinger, BM. Daiw, B. Chinn : Validation of a 3D human head model and replication of head impact in motorcycle accident by finite element modeling. Proceed. of the 41th Stapp Car Crash Conf. Lake Buena Vista USA, (ISBN n° 0768000335), 1997, pp 329-338.

Lee, B.-J., Vecchio, K.S., Ahzi, S., Schoenfeld, S. : Modeling the mechanical behavior of tantalum, (1997) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 28 (1), pp. 113-122.

Molinari, A., Ahzi, S., Kouddane, R. : On the self-consistent modeling of elastic-plastic behavior of polycrystals, (1997) Mechanics of Materials, 26 (1), pp. 43-62.

R. Willinger : Mathematical modeling of the human head. Literature review for COST 327 “Motorcycle safety helmets”. Copyright TRL, (ISBN 0 9521860 71), 1997, Chapitre 4, pp 61-94.

R. Willinger : Biomechanical aspects of head trauma : Head modeling and injury mechanisms. Neurotraumatology, Oehmichen&König, ed Lübeck:Schmidt-Römhild, (ISBN 3-7950-0314-8), 1997, pp 29-58.

1996

O. Allix, N. Bahlouli, C. Cluzel, L. Perret, Modelling and identification of temperature dependent mechanical behaviour of the elementary ply in carbon-epoxy laminates. Composites Science and Technology, Volume 56, Issue 7, 1996, Pages 883-888.

H.S. Kang, R. Willinger, F. Turquier, A. Domont, X. Trosseille, C. Tarriere, F. Lavaste : Validation study of a 3 D finite element head model against experimental data. Proceed. of the 40th Stapp Car Crash Conf. Albuquerque USA (ISBN 1-56091-901-9), 1996, pp 283-294.

HS Kang , R. Willinger, B. Diaw : Champ de pression intracérébral en cas de traumatisme crânien. Mécanique Industrielle et Matériaux, 1996, Vol. 49, N° 5, pp 237-239.

Schoenfeld, S.E., Ahzi, S., Asaro, R.J., Blumenthal, W.R. : The bulk processing of 2223 BSCCO powders I. Densification and mechanical response, (1996) Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 73 (6), pp. 1565-1590.

Schoenfeld, S.E., Asaro, R.J., Ahzi, S., Bingert, J.F., Willis, J.O. : The bulk processing of 2223 BSCCO powders II. Tape rolling, (1996) Philosophical Magazine A: Physics of Condensed Matter, Structure, Defects and Mechanical Properties, 73 (6), pp. 1591-1620.

R. Willinger, T. Guimberteau, AJ. Mc Lean, R. Anderson, M. Farmer : Experimental and theoretical modeling of head impact - Influence of head modeling. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Dublin 1996, pp 21-34.

1995

Ahzi, Said, Lee, Bing-Jean, Asaro, Robert J. : Modeling of crystalline polymers with evolving microstructure: application to peek, (1995) American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 203, pp. 15-23.

Ahzi, Said, Parks, David M., Argon, Ali S. : Estimates of the overall elastic properties in semi-crystalline polymers, (1995) American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 203, pp. 31-40.

Lee, B.J., Ahzi, S., Asaro, R.J. : On the plasticity of low symmetry crystals lacking five independent slip systems, (1995) Mechanics of Materials, 20 (1), pp. 1-8.

Schoenfeld, S.E., Ahzi, S., Asaro, R.J. : Elastic-plastic crystal mechanics for low symmetry crystals, (1995) Journal of the Mechanics and Physics of Solids, 43 (3), pp. 415-446.

R. Willinger, L. Taleb, C.M. Kopp : Modal and temporal analysis of head mathematical models. J of Neurotrauma 1995, V12, N4, pp 743-754.

R. Willinger, L. Taleb, P. Pradoura : Head biomechanics : from the finite element model to the physical model. Proceed. of the International Research Council on Biokinetics of Impact, (IRCOBI), Brunnen 1995, pp 245-260.

1994

Ahzi, S., Lee, B.J., Asaro, R.J. : Plasticity and anisotropy evolution in crystalline polymers, (1994) Materials Science and Engineering A, 189 (1-2), pp. 35-44.

O. Allix, N. Bahlouli, P. Ladeveze, L. Perret, Damage modelling of composite laminates at various temperatures. AMD Vol.185, Damage Mechanics in Composites, ASME, D.H. Aden, J.W. Wu eds, pp. 21-35, 1994.

J. Bajkowski, W. Grzesikiewics, R. Willinger : The impact of two structures through constraints. J of Machine Dynamics Problems (ISSN 0239-7730) 1994, Vol. 9, pp 7-19.

R. Willinger, L. Taleb, P. VIGUIER, C.M. Kopp : Rotation - translation duality in head trauma : Perceptive and objective evidence. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Lyon 1994, pp 63-74.

R. Willinger, G.A. Ryan, A.J. Mc Lean, C.M. Kopp : Mechanisms of brain injury derived from mathematical modelling and epidemiological data. Accid. Anal. and Prev., (ISSN 0001-4575) 1994, Vol 26 N° 6, pp 767-779.

1993

Ahzi, S., Asaro, R.J., Parks, D.M. : Application of crystal plasticity theory for mechanically processed BSCCO superconductors, (1993) Mechanics of Materials, 15 (3), pp. 201-222.

Lee, B.J., Parks, D.M., Ahzi, S. : Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers, (1993) Journal of the Mechanics and Physics of Solids, 41 (10), pp. 1651-1687.

Lee, B.J., Ahzi, S., Kad, B.K., Asaro, R.J. : On the deformation mechanisms in lamellar TiAl alloys, (1993) Scripta Metallurgica et Materiala, 29 (6), pp. 823-828.

Lee, B.J., Argon, A.S., Parks, D.M., Ahzi, S., Bartczak, Z. : Simulation of large strain plastic deformation and texture evolution in high density polyethylene, (1993) Polymer, 34 (17), pp. 3555-3575.

L. Taleb, R.Willinger, C.Fellemann, C.M. Kopp : Analyse modale de la boîte crânienne humaine. J de Mécanique Industrielle et Matériaux 1993, Vol. 46 n° 2, pp 92-95.

R. Willinger, C.M. Kopp, M. Ramet, R. Bouquet, Y. Caire : Proposition of a new dummy head : The bimass 150 principle. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Eindhoven 1993, pp 229-240.

1992

R. Willinger, C.M. Kopp, P. Harlicot : Modèle à paramètres distribués de la tête humaine. Mécanique, Matériaux, Electricité, 1992, N° 443 , pp 36-39.

R. Willinger, G.A. Ryan, A.J. Mc Lean, C.M. Kopp : Mechanisms of brain injury derived from mathematical modeling and epidemiological data. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Verona 1992, pp 179-192.

R. Willinger, C.M. Kopp, D. Cesari: New concept of contrecoup lesions ; Modal analysis of a finite element head model. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Verona 1992, pp 283-297.

1991

R. Willinger, C. Kopp, D. Cesari : Head tolerance curves in the frequency domain. Proc. of International Technical Conference on Experimental Safety Vehicles. Washington US Department of Transportation. National Highway Traffic Safety Administration, 1991, Vol. 2, pp 916-923.

R. Willinger, C.M. Kopp, A. Gentine : The inner ear and brain stem functions as a severity index for head trauma. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Berlin 1991, pp 127-141.

R. Willinger, C.M. Kopp, D. Cesari : Cerebral motion and head tolerance. 35 th Proceed. of the Association for the Advancement of Automotive Medicine, (ISSN 0892-6484), Toronto 1991, pp 387-404.

1990

Ahzi, S., Parks, D.M., Argon, A.S. : Modeling of plastic deformation evolution of anisotropy in Semi-Crystalline Polymers, (1990) American Society of Mechanical Engineers, Materials Division (Publication) MD, 20, pp. 287-292.

Parks, D.M., Ahzi, S. : Polycrystalline plastic deformation and texture evolution for crystals lacking five independent slip systems, (1990) Journal of the Mechanics and Physics of Solids, 38 (5), pp. 701-724.

R. Willinger, D. Cesari : Mise en évidence du mouvement cérébral par mesure d’impédance mécanique. Mécanique, Matériaux, Electricité, 1990, N°434, pp 45-47.

R. Willinger, D. Cesari : Evidence of cerebral movement at impact through mechanical impedance methods. Conf. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Lyon 1990, pp 203-213.

Avant 1990

Ahzi, S., Parks, D., Argon, A. : Simulation of deformation and texture evolution in semi-crystalline polymers, (1989) American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, 30 (2), pp. 55-56.

Ladeveze, P., Remond, Y., Vittecoq, E. : Mechanical testing for high performance composite materials: difficulties and criteria for their qualification [Essais mecaniques sur composites a hautes performances. Difficultes et criteres de validite], (1989) RFM, Revue Francaise de Mecanique, (2), pp. 219-227.

Dumont, J.P., Ladeveze, P., Poss, M., Remond, Y. : Damage mechanics for 3-D composites, (1987) Composite Structures, 8 (2), pp. 119-141.

Molinari, A., Canova, G.R., Ahzi, S. : A self consistent approach of the large deformation polycrystal viscoplasticity, (1987) Acta Metallurgica, 35 (12), pp. 2983-2994.

Ladeveze, P., Proslier, L., Remond, Y. : RECONSTRUCTION OF A 3-D COMPOSITE BEHAVIOUR FROM A LOCAL APPROACH., (1985) pp. 1025-1037.