Publications

• Sommaire
  • 2012
  • 2011
  • 2010
  • 2009

2012

N. Bahlouli, D. Pessey, C. Raveyre, J. Guillet, S. Ahzi, J.M. Hiver, A. Dahoun, Recycling effects on the rheological and thermomechanical properties of polypropylene-based composites, Materials and Design 33 (1) , pp. 451-458 , 2012.

N. Barth, D. George, S. Ahzi, Y. Rémond, V. Doquet, F. Bouyer and S. Betrémieux, Modeling and simulation of the cooling process of borosilicate glass, Journal of Engineering Materials and Technology, 2012, vol. 134 (4), pp. 041001.

N. Bourdet, C. Deck, R. P. Carreira, and R. Willinger, “Head Impact Conditions in the Case of Cyclist Falls,” Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, Apr. 2012.

N. Bourdet, C. Deck, V. Tinard and R. Willinger, Behaviour of helmets during head impact in real accident cases of motorcyclists, International Journal of Crashworthiness, Volume 17, Issue 1, 2012, pages 51-61

A. Madeo, D. George, T. Lekszycki, M. Nierenberger, Y. Rémond, A second gradient continuum model accounting for some effects of microstructure on reconstructed bone remodeling, Compte Rendus Académie des Sciences, Mécanique, 2012, vol. 340 (8), pp. 575-589.

R. Matadi Boumbimba, K. Wang, N. Bahlouli, S. Ahzi, Y. Rémond, F. Addiego, Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposites. Mechanics of Materials, 52, pp. 58-68. 2012.

Z. Nibennanoune, D. George, F. Antoni, S. Ahzi, D. Ruch, J. Gracio and Y. Remond, Improving diamond coating on Ti6Al4V substrate using a diamond like carbon interlayer : Raman residual stress evaluation and AFM analyses, Diamond and Related Materials, 2012, vol. 22, pp. 105-112.

Peng Y., HanY,Yang J,Chen Y.,Willinger R Assessment of the protective performance of hood using head FE model in car-pedestrian collisions. . Int J Crash Worthiness: accepted in Jan 2012

R. A. Rahman, D. George, D. Baumgartner, M. Nierenberger, Y. Rémond, S. Ahzi, An asymptotic method for the prediction of the anisotropic effective elastic properties of the cortical vein – superior sagital sinus junction embedded within a homogenized cell element, Journal of Mechanics of Materials and Structures, 2012, vol. 7 (6), pp. 593-611.

Wang, K., Matadi,-R., Bahlouli, N., Ahzi S., Muller, R., Bouquey, M. Dynamic compressive behavior of a melt mixed polypropylene/organoclay nanocomposites Journal of Engineering Materials and Technology, Volume: 134   Issue: 1, 2012.

Wang, K., Addiego, F., Bahlouli, N., Ahzi, S., Rémond, Y., Toniazzo, V. and Muller, R., Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends. Polymer Degradation and Stability, 97(8), pp. 1475-1484,2012.

2011

Baumgartner D, Lamy M, Willinger R, Davidsson J., A finite element model of the rat brain for injury investigation, Computer Methods in Biomechanics and Biomedical Engineering, Vol. 14, N° S1, pp. 273-274, 2011

Bourdet N, Willinger R. : Whiplash injury criteria investigation with a global head neck torso model.: Int. J. of Vehicle safety, 2011, vol 5, N°2, 168-188.

N. Bourdet, C. Deck, V. Tinard, and R. Willinger, “Behaviour of helmets during head impact in real accident cases of motorcyclists,” International Journal of Crashworthiness, vol. 17, no. 1, pp. 51–61, 2011.

Chatelin S., Oudry J., Périchon N, Sandrin L., Allemann P., Soler L., Willinger R. : In vivo liver tissue mechanical properties by transient elastography : Comparison with dynamic mechanical analysis. Biorheology 48 (2011) 75-88.

Chatelin S., Deck C., Renard F., Kremer S., Heinrich C., Armspach JP, Willinger R : Computation of axonal elongation in head trauma finite element simulation. J of Mech. Behavior of Biomed Material, Vol.4, 2011, 1905-1919

Ghajari M., Galvaneto U ,Iannucci L, Willinger R :Influence of body on the response of the helmeted head during impact. Int. J. Crashwortheness, 2011, V16, N°3, 285-295.

Lamy M, Baumgartner D, Willinger R, Yoganandan N, Stemper B.D.: Study of mild traumatic brain injuries using experiments and finite element modeling, Annals of Advances in Automotive Medicine, Vol. 55, pp. 125-135, 2011

A. Laurent-Vannier, M. Nathanson, F. Quiriau, E. Briand-Huchet, J. Cook, T. Billette de Villemeur, J. Chazal, C. Christophe, S. Defoort-Dhellemmes, G. Fortin, C. Rambaud, J.S. Raul, C. Rey-Salmon, F. Sottet, E. Vieux, M. Vinchon, R. Willinger : A public hearing ‘‘Shaken baby syndrome: Guidelines on establishing a robust diagnosis and the procedures to be adopted by healthcare and social services staff’’. Guidelines issued by the Hearing Commission. Anals of physical and rehabilitation medicine, 2011, v333, 26p.

Matadi,-R., Ahzi,-S., Bahlouli,-A., Ruch,-D., Gracio J : Dynamic mechanical properties of PMMA/oganoclay nanocomposite: Experiments and modeling Journal of engineering material and technology. Volume: 133   Issue: 3, 2011.

Yong Peng, Yong Chen, Jikuang Yang, Dietmar Otte, and Remy Willinger :A study of pedestrian and bicyclist exposure to head injury in passenger car collisions based on accident data and simulations. J of Safety Science , accepted in Dec 2011.

Tinard V, Deck C., Bourdet N., Willinger : Motorcyclist helmet composite outer shell characterisation and modelling. J of Materials and Design 32 (2011), pp. 3112-3119.

Umale S , Chatelin S, Bourdet N, Deck C ,Diana M, Dhumane P, Soler L, Marescaux J, Willinger R:Experimental in vitro characterization of Porcine Glisson’s Capsule and Hepatic Veins. J. of Biomechanics, 2011, V44, N°9, 1678-1683.

2010

N. Bahlouli, C. Rogueda-Berriet, J. Guillet, C. Raveyre : Propriétés rhéologiques et mécaniques des composites à matrice polypropylène pour l’automobile: effets couples de la pollution et du recyclage, Revue des Composites et des Matériaux Avancés, Volume20 n° 3/2010.

Chatelin S., Constantinesco A., Willinger R. : Fifty years of brain tissue mechanical testing. J of Biorheology 2010, vol. 47, 255-276.

M. Dubé, V. Doquet, A. Constantinescu, D. George, Y. Rémond and S. Ahzi, Modeling of Thermal Shock-Induced Damage in a Borosilicate Glass, Mechanics of materials, 2010, vol. 42, issue 9, pp 863-872

Hablot, E., Wang, K., Bahlouli, N., Ahzi, S., Averous, L, High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibers” Composites Science and Technology 71 (5), pp. 674-682

A. Hostettler, D. George, Y. Rémond, S. A. Nicolau, L. Soler and J. Marescaux, Bulk Modulus and Volume Variation Measurement of the Liver and Kidneys in vivo using Abdominal Kinetics during free Breathing, Computer Method and Programs in Biomedicine, 2010, vol. 100, pp. 149-157.

Marchesseau S., Heiman T., Chatelin S, Willinger R, Delingette H : Fast porous visco-hyperelastic soft tissue model for surgery simulation : Application to liver surgery. Progress in Biophysics & Molecular Biology 2010, (103), 185-196.

Z. Nibennaoune, D. George, F. Antoni, J. Santos, G. Cabral, S. Ahzi, D. Ruch, J. Gracio and Y. Rémond, Towards Optimization of Time Modulated Chemical Vapour Deposition for Nanostructured Diamond Films on Ti6Al4V, Journal of Nanoscience and Nanotechnology, 2010, vol. 10, pp 2838-2843.

Z. Nibennaoune, D. George, S. Ahzi, D. Ruch, Y. Rémond and J. Gracio, Numerical Simulation of Residual Stresses in Diamond Coating on Ti-6Al-4V Substrate, Thin Solid Films, 2010, vol. 518, pp 3260-3266.

D. Pessey, N. Bahlouli, C. Raveyre, J. Guillet, S. Ahzi, JM Hiver, A. Dahoun : Characterization of pollution effects for two PPbased materials, (2010) Polymer Engineering and Science, 50 (1), pp. 1-9.

Pinnoji PK, , P. Mahajan, N. Bourdet, C. Deck, R. Willinger : Impact Dynamics of Metal Foam Shells for Motorcycle Helmets: Experiments & Numerical Modeling : International Journal of Impact Mechanics, 2010, V37, 274-284.

C. Rogueda-Berriet, N. Bahlouli, D. Pessey, Mechanical behavior of recycled PP compounds: tensile, bending and creep tests, Journal of Engineering Materials and Technology, 133 (3), art. no. 030907

RothS, Raul JS, Willinger R : Finite elements modelling of paediatric head impact. Global validation against experimental data. Computer Methods and Programs in Biomed, 2010, 99, 25-33.

2009

N. Bahlouli, C. Gauthier, J.M. Pelletier, D. Pessey : Micromechanical approach of the dynamic behavior of a high impact PP and PP compound: recycling and pollution effects, J. Phys. IV, 1   pp: 703-708, 2009.

Chakroun M., Ben Ghozlen H., Elloumi, I., Willinger R. : Détermination du module d’élasticité de la matière cérébrale. CR de Physique, Elsevier, 2009, (10), 236-241.

S Chatelin, J Vappou, E Breton, C Goetz, P Choquet, R Willinger, A Constantinesco. Visco-Elastic Properties of Ex-Vivo and In-Vivo Brain Tissue by Low Field MR-Elastography, Proceedings of the 7th International Conference on the Ultrasonic Measurement and Imaging of Tissue Elasticity, 2008, Lake Travis, Austin, Texas, USA, p.30.

Deck C., Willinger R., “The current state of the Human Head FE modelling”, International Journal of Vehicle Safety, 2009, Vol. 4, No 2, 58-112.

Deck C., Willinger R., “Head Injury Prediction Tool for Protective Systems Optimization”, 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Deck C., Willinger R., “Improved model based head injury criteria” SimBio-M Conference, 1-3 July 2009, Juan les Pins, France.

Feist F., Gugler J., Arregui-Dalmases C., Del Pozo de Dios E., Lopez-Valdèz F., Deck C., Willinger R., Pedestrian Collisions with flat fronted vehicles:Injury patterns and importance of rotational accelerations as a predictor for traumatic brain injury (TBI), 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV), 15-18 June 2009, Stuttgart, Germany.

Ipek H., Deck C., Luce H., De Gueselle P., Mayer C., Willinger R., Coupling of Strasbourg University Head Model to THUMS human body FE model:Validation and application to Automotive Safety, 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV), 15-18 June 2009, Stuttgart, Germany.

Marjoux, D., Bourdet, N., and Willinger, R. . Computation of axonal elongations: towards a new brain injury criterion. International Journal of Vehicle Safety, 2009, Vol.4 No 4, pp.271-284.

Meyer F, Willinger R : Three years old child head-neck FE modelling : Simulation of the interaction with the air bag in front and side impact. Int. J of Vehicle Safety. 2009, Vol 4 N°4, 285-299.

Munsch M., Anderson R., Deck C., Ludes B., Willinger R., Influence of head boundary conditions in pedestrian real world head trauma simulations. Proceeding of the IRCOBI Conference, York, UK, 2009.

Munsch M., Bourdet N., Deck C., Willinger R., Lateral Glazing characterization under head impact:Experimental and numerical investigation, 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV), 15-18 June 2009, Stuttgart, Germany.

Oudry J, Bastard C., Miette V., Willinger R., Sandrin L : Copolymer-in-oil phantom materials for elastography. Ultrasound in Med & Biol. 2009, Vol 35, N7, 1185-1197.

J. Oudry, J. Vappou, P. Choquet, R. Willinger, L. Sandrin, and A. Constantinesco, Ultrasound-based Transient Elastography compared to Magnetic Resonance Elastography in soft tissue-mimicking gels, Phys Med Biol, 2009, N°54, 6979-6990.

Oudry J, J. Chen, K.J. Glaser, V. Miette, L. Sandrin, R.L. Ehman, Cross-Validation of Magnetic Resonance Elastography and Ultrasound-Based Transient Elastography: A Preliminary Phantom Study, J Magn Res, accepted, 2009.

J Oudry, N Perichon, S Chatelin, P Allemann, L Soler, R Willinger, L Sandrin. Validation of Ultrasound-based Transient Elastography by means of Dynamic mechanical Analysis: Application to In vivo/In vitro Porcine Liver, Proceedings of the IEEE International Ultrasonics Symposium, 2009, Roma, Italy, p.206.

Périchon N., Oudry J., Chatelin S., Sandrin L., Allemann P., Soler L., Willinger R. In vivo liver tissue mechanical properties by transient elastography : Comparison with dynamic mechanical analysis. Proceeding of the IRCOBI Conference, York, UK, 2009.

Roth S, Vappou J., Raul JS, Willinger R :Child head injury criteria investigation through numerical simulation of real world trauma. Comput Methods Programs Biomed 2009, Vol.93,pp 32-45.

Tinard V, Deck C. Meyer F., Bourdet N., Willinger R., Influence of pedestrian head surrogate and boundary conditions on head injury risk prediction. Int. J. Crashwortheness, 2009, Vo 14 No 3, 259-268.

2008

Bourdet N., Willinger R : Human thorax – car seat coupling for rear impact investigation. Accepted in Journal of Sound and Vibration . 2008, Vol 313/3-5 pp 891-907

Deck C., Willinger R., “Improved head injury criteria based on head FE model”, International Journal of Crashworthiness, Vol 13, No 6, pp. 667-678, 2008.

D. Pessey, N. Bahlouli, S. Ahzi and M.A. Khaleel : Strain Rate Effects on the Mechanical Response of Composite Based Polypropylene Deformed at Small Strains, (2008) Polymer Science - Series A 50 (6), pp. 690-697.

Pessey, D., Bahlouli, N., Pattofato, S., Ahzi, S. : Polymer composites for the automotive industry: Characterization of the recycling effect on the strain rate sensitivity, International Journal of Crashworthiness 13 (4), (2008) pp. 411-424.

Raul JS, Roth S, Ludes B, Willinger R : Influence of the benign enlargement of the subarachnoid space on the bridging veins strain during a shaking event : a finite element study. Int. J. Legal Med 2008, DoI 10.I007/s00414-008-0242-6.

Raul JS, Deck C, Ludes B, Willinger R : Finite element models of the human head and their applications in forensic practice. Int.J.Legal Med 2008, DoI 10.I007/s00414-008-0248-0.

Roth S, Raul JS, Willinger R : Biofidelic child head FE model to simulate real world head trauma. Comp Models and Prog in Biomed. 2008-90, 262-274.

2007

S. Ahzi, N. Bahlouli, A. Makradi, S. Belouettar : Composite Modeling for the Effective Elastic Properties of Semi-Crystalline Polymers, Journal of Mechanics of Materials and Structures , 2, n°1, pp. 1-22, 2007.

Baumgartner D., Marjoux D., Willinger R. : Primary and secondary impact of pedestrian head. Enhanced Safety Vehcle Conf. Lyon 2007.

Deck C, Baumgartner D, Willinger R : Influence of rotational acceleration on intracranial mechanical parameters under accidental circumstances. Conf. Proceed of IRCOBI 2007, 185-197

K. Hizoum, Y. Rémond, N. Bahlouli, V. Oshmiyan, S. Patlazan AND S. Ahzi : Non linear strain rate dependency and unloading behavior of semi crystalline polymers: Overview of some constitutive models. Oil and Gas Science and Technology 61 (6), pp. 743-749.2007.

Marjoux D., Deck C., Baumgartner D., WillingerR. : Head Injury Prediction Capability of the HIC, HIP, SIMon And ULP Criteria. Accident Analysis and Prevention, 2007, Vol 40/3 pp 1135-1148

Marjoux D., Willinger R. : Space needed by a decelerating head to keep an imposed HIC at a given impact velocity. Int. J. Vehicle Safety, 2007, Vol2 N°4, 368-377.

Meyer F, Bourdet N, Roth S, Willinger R : Three years old child neck FE modelling under automotive accident conditions. Conf. Proceed of IRCOBI 2007, 277-290

M'Guil, S., Ahzi, S., Youssef, H., Gracio, J., Khaleel, M.A. : Comparison between self-consistent and intermediate approaches for the simulation of large deformation polycrystal viscoplasticity, (2007) Materials Science Forum, 553, pp. 81-86.

Raul JS, Ludes B, Willinger R. : Finite Element Models of the Human Head in the Field of Forensic Science. In Skeletal Trauma : Identification of injuries resulting from human right abuse and armed conflict. Erin H. Kimmerle ISBN 0-8493-9269-1 ; CRC Press 2008

Roth S, Raul JS, Willinger R : Limitation of scaling methods in child head finite elements modelling. Int. J. Vehicle Safety, 2007. Vol 2, N°4, pp 405-421.

Tinard V., Bourdet N., Deck C., Willinger R. : Active pedestrian head protection against windscreen impact. Enhanced Safety Vehicle Conf. Lyon 2007

Vappou J., Breton E, Choquet P, Goetz C., Willinger R., Constantinesco A. : Magnetic resonance elastography compared with rotational rheometry for in vitro brain tissue viscoelasticity measurment. Accepté dans MAGMA en decembre 2007.

2006

N. Bahlouli, D. Pessey, S. Ahzi, Y. Rémond, Mechanical behavior of composite based polypropylene : recycling and strain rate effect, J. Phys. IV France, 134 (2006) 1319-1323.

Bourdet N, Willinger R :Modelling of car seat and human boddy interaction under rear impact. International Journal of Crashworthiness,2006, Vol. 11, No 6, pp. 553-560

Deck C, Willinger R : Multidirectioal optimisation against biomechanical criteria of a coupled head-helmet model. International Journal of Crashworthiness, 2006, Vol. 11, No 6, pp. 561-572.

Dupuis R, Meyer F, Deck C, Willinger R. Three year old child neck finite element modelization . Eur J Orthop Surg. Traumato (2006), s00590-005-0068-6.

C. Gontier, D. George and M. Raffy, Energetic mode contributions in stochastic modal analysis: An application to mode classification, Journal of Sound and Vibration, 2006, vol. 294, Issue 4-5, pp 944-965

Marjoux D, Baumgartner D, Deck C, Willinger R : Head injury prediction capability of HIC, HIP, SIMON and ULP criteria. Proceed. of the International Research Council on Biokinetics of Impacts : IRCOBI 2006, 143-158

Raul JS, Deck C, Meyer F, Geraut A, Willinger R, Ludes B : A finite element model investigation of gunshot injury. International Journal of Legal Medicine, 2006, pp 1–4

Raul JS, Baumgartner D, Ludes B, Willinger R : Finite element modelling of head injuries caused by a fall. Int J of Leg. Med.,2006, V 120, pp 212-218.

Roth S, Raul JS, Lude B, Willinger R : Finite element analysis of impact and shaking inflicted to child. Int. J. Legal Med 2006,DoI 10.I007/s00414-006-0129-3

Roth S, Raul JS, Willinger R : Limitation on scaling methods in child head modelling. Proceed. of the International Research Council on Biokinetics of Impacts : IRCOBI 2006, 365-368

Vappou J., Willinger R., Breton E., Choquet P., Goetz C., Constantinesco A., “Dynamic viscoelastic shear properties of soft matter by Magnetic Resonance Elastography using a low-field dedicated system”, J. Rheol, 2006, Vol 50, Issue 4, pp531, 541.

2005

Ahzi, S., M'Guil, S. : Simulation of deformation texture evolution using an intermediate model, (2005) Diffusion and Defect Data Pt.B: Solid State Phenomena, 105, pp. 251-258.

Ahzi, S., M'Guil, S., Youssef, H., Khaleel, M., Gracio, J. : Non-linear viscoplastic polycrystalline intermediate modelling for texture evolution in FCC metals: Compression test, (2005) Materialwissenschaft und Werkstofftechnik, 36 (10), pp. 533-537.

Baumgartner D, Willinger R. : Human head tolerance limits to specific injury mechanisms inferred from real world accident numerical reconstruction. Rev. Européenne des éléments finis : 2005, V4, N°4-5, 421-443.

Baumgartner D, Willinger R. : Finite element modelling of human head injuries caused by ballistic projectiles. Rev. Européenne des éléments finis : 2005, V4, N°4-5, 559-576.

P. J. Bouchard, D. George, J. R. Santisteban, G. Bruno, M. Dutta, L. Edwards, E. Kingston and D. J. Smith, Measurement of the Residual Stresses in a Stainless Steel Pipe Girth Weld Containing Long and Short Repairs, International Journal of Pressure Vessels and Piping, 2005, Vol. 82, Issue 4, pp. 299-310.

Bourdet N., Fischer R., Willinger R. : Human neck characterisation under thoracic vibration – Inter individual and gender influence. Proceed. of the International Research Council on Biokinetics of Impacts : IRCOBI 2005, 257-267

Bourdet N, Willinger R : Human body-car seat coupling under rear impact. Proceedings of the 2005 ESVConf. paper 261 pp 1-13, Washington DC June 2005.

Dupuis R., Meyer F. WillingerR. : Three years old child neck FE modelling Proceedings of the 2005 ESVConf. paper 081 pp 1-9, Washington DC June 2005.

D. George and D. J. Smith, Through Thickness Measurement of Residual Stresses in a Stainless Steel Cylinder Containing Shallow and Deep Weld Repairs, International Journal of Pressure Vessels and Piping, 2005, Vol. 82, Issue 4, pp. 279-287.

Meyer F., Bourdet N., Willinger R. : Experimental and numerical modal analysis of the human head neck system. Int. J of Vehicle Safety, 2005, Vol 1,.n°1, 145-167.

M'Guil, S., Ahzi, S. : An intermediate viscoplastic model for deformation texture evolution in polycrystals, (2005) Materials Science Forum, 495-497 (PART 2), pp. 989-994.

Nicolle, S., Lounis, M., Willinger, R. and Palierne J-F. (2005). Shear Linear Behavior of Brain Tissue over a Large Frequency Range. Biorheology 42(3), 209-223.

Willinger R, Bourdet N, Fischer R., Legal F: Modal analysis of the human head neck in vivo as a criteria for crash test dummy evaluation. J. of Sound and Vib,2005,V287-3, 405-431

2004

N. Bahlouli, S. M’Guil, S. Ahzi AND M. Laberge : Stress-Strain Response of Biomaterials by a Digital Image Correlation Method: Application to Tecoflex®. J. of Material Science and Technology, 20, pp. 114-116, 2004.

M. Chakroun, M. Zagrouba, I. Elloumi : Modélisation du comportement vibratoire de la matière cérébrale : Modèle de Maxwell semi-linéaire. Rhéologie (2004), Vol6, 67-73

C. Deck, S. Nicolle, R. Willinger : Human head FE modelling : Improvement of skull geometry and brain constitutive laws. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI) 2004, pp79-92

C. Deck, R. Willinger, H.D. Wehner : Tödliches Schädelhirntrauma bei einem Kleinkind. Teil II : Biomechanishe Rekonstruktion. Arch. Für Kriminologie. 2004, 214, 48-55.

C. Husson, C. Poizat, N. Bahlouli, S. Ahzi, T. Courtin, L. Merle : On plasticity and damage evolution during sheet metal forming, IUTAM Symposium On Multi scale modelling and characterization of elastic-inelastic behaviour of engineering materials, Marrakech , (IUTAM symposium). S. Ahzi et al. eds., Kluwer Academic Publishers, pp243-250, 2004.

De Magalhães Correia, J.P., Ferron, G. : Wrinkling of anisotropic metal sheets under deep-drawing: Analytical and numerical study, (2004) Journal of Materials Processing Technology, 155-156 (1-3), pp. 1604-1610.

McGrath, Neal M., Baumgartner D., Willinger R. : The effect on human head model predictions of representing the skull as a rigid body. I MECH E –Vehicle Safety 2004, pp 100-109.

Meyer F, Willinger R, Legal F : The importance of modal validation for biomechanical models ; application to the cervical spine. Finite elements in analysis and design, 2004, vol 40, 1835-1855.

Meyer, Willinger Bourdet Legal Deck : FE modelling of the human head neck : Modal analysis and validation in the frequency domain. Int. J. of Crashwothiness, 2004,Vol.9, N°5, 535-545.

Meyer F., Bourdet N., Deck C., Raul JS., Willinger R. : Human neck FE model development and validation against original experimental data. Stapp Car Crash J. 2004, Vol 48, 177-206

Neal M., McGrath, Baumgartner D., Willinger R. : Comparative study between FE human head and dummy head model response under impact. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI)2004, pp 69-78

Nicolle S., Lounis M., Willinger R : Shear properties of brain tissue over a frequency range relevant for automotive impact situations : New experimental data. Stapp Car Crash J. 2004, Vol 48, 239-258

Raul J.S., Deck C., Meyer F., Géraut A., Traqui A., Willinger R., Ludes B., « Suicide (2004) par trois coup de feu. Une étude biomécanique » Journal de médecine légale droit médical, Vol 45, n°7-8, pp 432-437.

2003

D. Baumgartner, R. Willinger : Finite element modelling of human head injuries caused by ballistic projectiles. Proceed of NATO/RTO Conf, Koblenz, May 2003.

D. Baumgartner and R. Willinger :Human head tolerance limits against impact derived from numerical real world accidents reconstruction. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

N. Bourdet, R. Willinger, B. Schwaller, F. Le Gall* : Analysis of the modal behaviour of the head-neck system in vivo. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

C. Deck, R. Willinger, D. Baumgartner : Helmet optimisation based on head-helmet modelling. Proceed of OPTI Conf. Detroit, 2003.

C. Deck, R. Willinger, D. Baumgartner : Modelling of the human head-helmet interaction. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

R. Fischer, N. Bourdet, R. Willinger, F. Le Gall : Devlopment and validation of a new human neck physical model. Proceed of TEST 03 Conf. Nurenberg 2003

F. Meyer, R. Willinger, N. Bourdet .Modal analysis of a head-neck finite element model. Proceed. of NAFEMS Conf. Orlando, 2003

De Magalhaes Correia, J.P., Ferron, G. : Wrinkling of anisotropic sheet metals under deep drawing, (2003) Journal De Physique. IV : JP, 105, pp. 89-96.

De Magalhães Correia, J.P., Ferron, G., Moreira, L.P. : Analytical and numerical investigation of wrinkling for deep-drawn anisotropic metal sheets, (2003) International Journal of Mechanical Sciences, 45 (6-7), pp. 1167-1180.

A. Niass, R. Dupuis, R. Willinger : Evaluation des blessures de la face en situation d’impact à partir d’un modèle éléments finis. Proceed of the International Crashworthiness and Design symposium, Lille, 2003.

S. Nicolle, R. Willinger, L. Mourad : High frequency modelling of porcine brain tissue. Int. Conf on Computational Methods and Exp. Measurements, Halkidiki 2003.

R. Willinger, N. Bourdet, R. Fischer, F. Le Gall :New Methode for biofidelity evaluation of dummy necks. Paper 343 ESV Conf. Nagoya, Japan, 2003

R. Willinger, D. Baumgartner : Numerical and physical modelling of the human head under impact – Towards new injury criteria. Int. J Vehicle Design, Vol.31, N1/2, 2003, pp 94-115

R. Willinger, D. Baumgartner : Human head tolerance limits to specific injury mechanisms. Int. J. of Crashwothiness, 2003, Vol 8 N°6,605-617.

2002

Ahzi, S., M'Guil, S., Agah-Tehrani, A. : A new formulation for the elastic-viscoplastic lower bound and intermediate modeling for polycrystalline plasticity, (2002) Materials Science Forum, 408-412 (I), pp. 463-468.

D. Baumgartner, R. Willinger : Tolerance limits for human brain neurological lesions derived from finite element head impact simulation. J of Hunan Univ., Vol 29, N°6, 2002, 44-56.

D. Baumgartner, R. Willinger, D. Otte, U. Boehnke : In deep analysis of pedestrian head impacts. Injury analysis, accident reconstruction and numerical head impact simulation. Proceedings of the International Crashworthiness Conference (ICRASH 2002) Melbourne, 2002.

D. George, E. Kingston and D. J. Smith, Measurement of Through Thickness Stresses Using Small Holes, Journal of Strain Analysis for Engineering Design, 2002, vol. 37, no. 2, pp. 125-139.

C. Husson, N. Bahlouli, S. M'Guil, S. Ahzi., Mechanical characterization of thin sheets by a digital image correlation method , J. Phys IV, pr11.393- 400, 2002.

De Magalhães Correia, J.P., Ferron, G. : Wrinkling predictions in the deep-drawing process of anisotropic metal sheets (2002) Journal of Materials Processing Technology, 128 (1-3), pp. 178-190.

C. Poizat, C. Husson, S. Ahzi, N. Bahlouli, L. Merle : Modeling of thin sheet blanking with a micromechanical approach, International Journal of forming process 5 N° 2-3-4, pp. 423-432, 2002.

E. Schuller, Schinn B., Doyle D, Makitupa S., Otte D., Willinger R. : Prediction of head and neck Injury Severity and tolerance for helmeted motorcycle riders involved in traffic accidents. Proceedings of the International Crashworthiness Conference (ICRASH 2002) Melbourne, 2002.

J. Sübke, HD Wehner, R Willinger, K. Wolf : Tödliches Schädelhirntrauma bei einem Kleinkind. Teil I : Forensische Dokumentation, Modellgenerierung und geometrische Impactbedingungen. Arch. Für Kriminologie. 2002,209:147-157

R. Willinger, BM Diaw, D. Baumgartner, B. Chinn : Full face protective helmet modeling and coupling with a human head model. Int. J. of Crashworthiness, 2002, Vol 7, N°2, 167-178.

R. Willinger, N. Bourdet, B.Schwaller, F. Legal: Modal characteristics of the head-neck system in vivo. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Munich, 2002

R. Willinger, N. Bourdet, B. Schwaller, F. Legal : Characterization and modelling of the human head-neck in the frequency domain. Proc. of the 5th Int. Conf. OnVibration Eng., Nanjing 2002, 167-173

2001 et avant

D. Baumgartner, R. Willinger, B. Diaw : FE modelling of a protective helmet. Parametric study and coupling with the human head. NAFEMS world congress 2001, 727-738, Lake Como, Italie, avril 2001.

D. Baumgartner, R. Willinger,: New dummy head prototype : Development, Validation and Injury Criteria. Int. Conf. On Material Testing and Research, Nuremberg, 2001, pp71-76

B. Chinn, B. Canaple, R. Willinger : Motorcycle accident reconstruction. COST 327 “Motorcycle safety helmets” final report Copyright TRL, janvier 2001.

C. Deck, R. Willinger, J Subke, HD Wehner : Severe head trauma of an infant caused by a sculpture. Part II: Biomechanical reconstruction. Computer Methods in Biomechanics & Biomedical Engeenering, Rome Oct. 2001

N. Shewchenko, M. Beusenberg D. B aumgartner, R. Willinger : Tolerance limits for mild traumatic brain injury derived from numerical head impact replication. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Isle of Man, 2001, 353-355.

J Subke, HD Wehner, R Willinger : Severe head trauma of an infant caused by a sculpture. Part I: Forensic Documentation and model generation Computer Methods in Biomechanics & Biomedical Engeenering, Rome Oct. 2001

R. Willinger, D. Baumgartner, B. Chinn : New dummy head prototype : development, validation and injury criteria . Int. J. of Crashworthiness, 2001, Vol 6, N°3, 281-294.

2000

D. George, E. Kingston and D. J. Smith, Residual Stress Measurement in Thick Section Components, American Society of Mechanical Engineers, Pressures Vessels and Piping Division, PVP Assessment Methodologies for Preventing Failure : Deterministic and Probabilistic Aspects and Weld Residual Stress, 2000, vol. 410-1, pp. 275-278.

D. George and D. J. Smith, The Application of the Deep Hole Technique for Measuring Residual Stresses in an Autofrettaged Tubes, American Society of Mechanical Engineers, Pressures Vessels and Piping Division, PVP High Pressure Technology, 2000, vol. 406, pp. 25-28.

D. George, D. J. Smith and P. J. Bouchard, Evaluation of through wall residual stresses in stainless steel weld repairs, Materials Science Forum, 2000, vol. 347, pp 646-651.

D. J. Smith, P.J. Bouchard and D. George, Measurement and Prediction of Through Thickness Residual Stresses in Thick Section Welds, Journal of Strain Analysis for Engineering Design, 2000, vol. 35, no. 4, pp. 287-305.

R. Willinger, T. Guimberteau, D. Baugartner : Dynamic characterization of motorcyclist’s helmet. J of Sound and Vibration. 2000, vol.235(4), 611-625.

R. Willinger, BM. Diaw, HS. Kang : Finite element modeling of skull fracture caused by direct impact. Int. J. of Crashworthiness, 2000, Vol.5 N°3, 249-258.

R. Willinger, V. Giavotto, B. Chinn : Mathematical modelling of the helmet-head-neck complex. COST 327 “Motorcycle safety helmets” final report Copyright TRL, mai 2000.

R. Willinger, D. Baumgartner, B. Chinn, M. Neale : Head tolerance limits derived from numerical replication of real world accidents. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Montpellier 2000, 209-221.

R. Willinger. B, Baumgartner. Chinn : New dummy head prototype : development, validation and injury criteria. Proceedings of the International Crashworthiness Conference (ICRASH 2000) London, 2000, 295-305.

1999

N. Bahlouli, J.Y. Cavaillé, M. Garcia-Ramirez, A. Camara. Thermo-mechanical behaviour of PE reinforced by ligno-cellulosic fillers. ACS symposium series v723, biopolymers utilizing Nature’s advanced materials. Edited by S.H. Imam, R.V.greene, B.R.Zaidi, pp65-76, 1999.

R Willinger, HS. Kang, BM. Diaw: Three-dimensional human head finite element model validation against experimental impacts. Annals of Biomed. Eng.1999, 27 (3), 403-410.

R. Willinger, HS. Kang, BM. Diaw : Développement et validation d’un modèle mécanique de la tête humaine. C. R. Acad. Sci. Paris, t.326, Série II b, pp. 125-131, 1999.

R. Willinger, B. Diaw, HS. Kang : Modélisation de la boîte crânienne et du cerveau soumis à un impact. Revue Française de Mécanique n° 1999-3,179-185.

1998

R. Willinger, BM. Diaw, HS.Kang : Finite element modeling of the human head – Modal and temporal validation. Int. Conf. on Vib. Eng., Dalian, China 1998, 10 pages

R. Willinger, BM. Diaw, D. Baumgartner : Development and validation of a bicycle helmet finite element model. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Göteborg 1998, pp 549-552.

1997

BM. Diaw, R. Willinger, HS. Kang : Finite element modeling of bone material discontinuity in case of skull fracture. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Hanover 1997, pp 461-463.

HS Kang, R Willinger, BM. Diaw, B. Chinn : Validation of a 3D human head model and replication of head impact in motorcycle accident by finite element modeling. J. of Passenger Cars, 1997, Vol. 106, Sect. 6, Part 1, pp 3849-3858.

HS Kang, R Willinger, BM. Daiw, B. Chinn : Validation of a 3D human head model and replication of head impact in motorcycle accident by finite element modeling. Proceed. of the 41th Stapp Car Crash Conf. Lake Buena Vista USA, (ISBN n° 0768000335), 1997, pp 329-338.

R. Willinger : Mathematical modeling of the human head. Literature review for COST 327 “Motorcycle safety helmets”. Copyright TRL, (ISBN 0 9521860 71), 1997, Chapitre 4, pp 61-94.

R. Willinger : Biomechanical aspects of head trauma : Head modeling and injury mechanisms. Neurotraumatology, Oehmichen&König, ed Lübeck:Schmidt-Römhild, (ISBN 3-7950-0314-8), 1997, pp 29-58.

1996

O. Allix, N. Bahlouli, C. Cluzel, L. Perret, Modelling and identification of temperature dependent mechanical behaviour of the elementary ply in carbon-epoxy laminates. Composites Science and Technology, Volume 56, Issue 7, 1996, Pages 883-888.

H.S. Kang, R. Willinger, F. Turquier, A. Domont, X. Trosseille, C. Tarriere, F. Lavaste : Validation study of a 3 D finite element head model against experimental data. Proceed. of the 40th Stapp Car Crash Conf. Albuquerque USA (ISBN 1-56091-901-9), 1996, pp 283-294.

HS Kang , R. Willinger, B. Diaw : Champ de pression intracérébral en cas de traumatisme crânien. Mécanique Industrielle et Matériaux, 1996, Vol. 49, N° 5, pp 237-239.

R. Willinger, T. Guimberteau, AJ. Mc Lean, R. Anderson, M. Farmer : Experimental and theoretical modeling of head impact - Influence of head modeling. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Dublin 1996, pp 21-34.

1995

R. Willinger, L. Taleb, C.M. Kopp : Modal and temporal analysis of head mathematical models. J of Neurotrauma 1995, V12, N4, pp 743-754.

R. Willinger, L. Taleb, P. Pradoura : Head biomechanics : from the finite element model to the physical model. Proceed. of the International Research Council on Biokinetics of Impact, (IRCOBI), Brunnen 1995, pp 245-260.

1994

O. Allix, N. Bahlouli, P. Ladeveze, L. Perret, Damage modelling of composite laminates at various temperatures. AMD Vol.185, Damage Mechanics in Composites, ASME, D.H. Aden, J.W. Wu eds, pp. 21-35, 1994.

J. Bajkowski, W. Grzesikiewics, R. Willinger : The impact of two structures through constraints. J of Machine Dynamics Problems (ISSN 0239-7730) 1994, Vol. 9, pp 7-19.

R. Willinger, L. Taleb, P. VIGUIER, C.M. Kopp : Rotation - translation duality in head trauma : Perceptive and objective evidence. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Lyon 1994, pp 63-74.

R. Willinger, G.A. Ryan, A.J. Mc Lean, C.M. Kopp : Mechanisms of brain injury derived from mathematical modelling and epidemiological data. Accid. Anal. and Prev., (ISSN 0001-4575) 1994, Vol 26 N° 6, pp 767-779.

1993

L. Taleb, R.Willinger, C.Fellemann, C.M. Kopp : Analyse modale de la boîte crânienne humaine. J de Mécanique Industrielle et Matériaux 1993, Vol. 46 n° 2, pp 92-95.

R. Willinger, C.M. Kopp, M. Ramet, R. Bouquet, Y. Caire : Proposition of a new dummy head : The bimass 150 principle. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Eindhoven 1993, pp 229-240.

1992

R. Willinger, C.M. Kopp, P. Harlicot : Modèle à paramètres distribués de la tête humaine. Mécanique, Matériaux, Electricité, 1992, N° 443 , pp 36-39.

R. Willinger, G.A. Ryan, A.J. Mc Lean, C.M. Kopp : Mechanisms of brain injury derived from mathematical modeling and epidemiological data. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Verona 1992, pp 179-192.

R. Willinger, C.M. Kopp, D. Cesari: New concept of contrecoup lesions ; Modal analysis of a finite element head model. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Verona 1992, pp 283-297.

1991

R. Willinger, C. Kopp, D. Cesari : Head tolerance curves in the frequency domain. Proc. of International Technical Conference on Experimental Safety Vehicles. Washington US Department of Transportation. National Highway Traffic Safety Administration, 1991, Vol. 2, pp 916-923.

R. Willinger, C.M. Kopp, A. Gentine : The inner ear and brain stem functions as a severity index for head trauma. Proceed. of the International Research Council on Biokinetics of Impacts, (IRCOBI), Berlin 1991, pp 127-141.

R. Willinger, C.M. Kopp, D. Cesari : Cerebral motion and head tolerance. 35 th Proceed. of the Association for the Advancement of Automotive Medicine, (ISSN 0892-6484), Toronto 1991, pp 387-404.

1990

R. Willinger, D. Cesari : Mise en évidence du mouvement cérébral par mesure d’impédance mécanique. Mécanique, Matériaux, Electricité, 1990, N°434, pp 45-47.

R. Willinger, D. Cesari : Evidence of cerebral movement at impact through mechanical impedance methods. Conf. Proceed. of the International Research Council on Biokinetics of Impacts (IRCOBI), Lyon 1990, pp 203-213.